Subscribe to Our Youtube Channel
Related Manuals for Ammann APR 2220
Summary of Contents for Ammann APR 2220
- Page 1 Trans la ti on of the original Ope ra ting in struc tions (EN) APR 2220 Serial Nr. 10985720- APR 2620 Serial Nr. 11003014- APR 3020 Serial Nr. 10985720- APR 3520 Serial Nr. 11003032- Book ID: 2-00002021...
- Page 3 Also ob serve the cor re spond ing rules and reg u la tions valid in your coun try. Ammann Verdichtung GmbH is not li a ble for the func tion of the ma chine when used in an im proper man ner and for other than the in tended pur pose.
-
Page 4: Safety Regulations
1. Sa fe ty re gu la tions This Ammann ma chine has been built ac cord ing to the state of Safety in for ma tion in the op er at ing and main te nance the art in com pli ance with the per ti nent rules. Nev er the less,... - Page 5 1. Sa fe ty re gu la tions Ma chi ne con trol Re place ex ter nally dam aged hy drau lic hoselines at reg u lar in ter vals (de pend ing on time used), even when no safety-rele- vant faults are Op er at ing de vices which ad just them selves au to mat i cally when re - vis i ble.
-
Page 6: Technical Data
2. Tech ni cal data B3299100 APR 2220 APR 2620 APR 3020 APR 3520 APR 2220 (H) APR 3020 (H) APR 3520 (H) 1. Di men sions Length L 1140 mm 1365 mm 1140 mm 1365 mm Length L1 600 mm... - Page 7 2. Tech ni cal data APR 2220 APR 2620 APR 3020 APR 3520 APR 2220 (H) APR 3020 (H) APR 3520 (H) Drive via cen tri fu gal clutch and V-belt Shift (for ward/re verse) hyd rau lic 4. Op er at ing speed...
-
Page 8: Operation
3.2 Op er at ing con trol at the tow-bar The APR 2220/2620/3020/3520 is a re vers ible vi brat ing plate op - er at ing on the ba sis of the twin-shaft vi bra tion sys tem prin ci ple. -
Page 9: Before Operation
3. Ope ra ti on 3.3 Be fo re ope ra ti on 3.4 Ad just ing / Lock ing the tow bar Use per sonal pro tec tive equip ment (in par tic u lar 3.4.1 Ad just ing the tow-bar hear ing pro tec tors and safety shoes). - Page 10 3. Ope ra ti on 3.5 En gine op er a tion – Honda 3.5.1 Start ing the En gine B4899006.cdr • Turn the en gine switch (4) to the «ON» po si tion. B4899004.cdr • Move the fuel valve le ver (2) to the «ON» po si tion. CLOSE Important OPEN...
- Page 11 3. Ope ra ti on 3.5.2 If the en gine starts 3.5.3 Stop ping the en gine To stop the en gine in an emer gency, sim ply turn the en gine switch to the «OFF» po si tion. Important 1 –...
- Page 12 3. Ope ra ti on 3.6 En gine op er a tion – Hatz 3.6.1 Start ing the En gine – Man ual start B1799204.cdr • Pull the start ing rope with in creas ing speed, un til the mo tor starts up.
-
Page 13: Stopping The Engine
3.6.3 Stop ping the en gine • Set the en gine speed le ver (1) to idle (MIN). • Al low the en gine to run for 1-2 min utes. APR 2220 / 2620 / 3020 • 1 – 2 min. STOP B3299088 •... - Page 14 3. Ope ra ti on 3.6.4 Elec tri cal start (APR 3020 / 3520) 3.6.5 If the en gine starts • In di ca tor lamp (3) lights to show that the en gine is op er at ing. 1 – 2 min. B3299089 •...
- Page 15 3. Op er a tion 3.6.6 Stop ping the en gine • APR 3520 STOP 1 – 2 min. B5399010.cdr B3299088 • Set the en gine speed le ver (1) to «STOP». Set the en gine speed le ver (1) to idle (MIN). •...
- Page 16 3. Op er a tion 3.7 Op er a tion 3.8 Wa ter spray (APR 2620) B3299050.cdr B2899001.cdr The wa ter spray is switched on and off by the le ver (1). • Set the en gine speed le ver (2) to full load (MAX). Op er ate the ma chine only at full throt tle and turn Wa ter spray front the ma chine al ways in idle po si tion dur ing short...
-
Page 17: Load Ing And Trans Por Ta Tion
4. Trans port 4.1 Load ing and trans por ta tion Only use suf fi ciently strong and se cure load ing ramps when load ing. Check the con tact points (frame, lift ing rings) be - Danger fore use for dam age and wear. Im me di ately re - place dam aged parts. -
Page 18: Trans Port Trolley
4. Trans port 4.2 Trans port trolley Dur ing lon ger work breaks, e.g. at the end of the work day, do not place the ma chine on the trans - port trol ley so that the sta bil ity of the ma chine is Danger not com pro mised. - Page 19 4. Trans port B3299084 • Us ing the tow ing bar, tilt the ma chine back wards un til the ma - chine is hor i zon tally seated on the un der car riage. The de vice is ready to be moved. •...
-
Page 20: Maintenance
5. Main te nance 5.1 Gen eral notes Be fore com menc ing work on any elec tri cal equip ment, • dis con nect the bat tery and cover it with in su lat ing ma te - Care ful main te nance: ri als. - Page 21 250 h API SG-CE APR 2620 SAE 10W40 APR 3020 1,1 l APR 3520 APR 2220 H 0,6 l First time af ter 20 h; then every 100 h APR 3020 H 1,1 l APR 3520 H 2. Ex ci ter...
-
Page 22: Fill Ing-Up With Fuel
5. Main te nance 5.5 Main te nance work en gine – Honda 5.5.2 Check ing the en gine oil level Im me di ately re place dam aged seals. Only the main te nance work which has to be per formed daily is in cluded in the Op er at ing Man ual. -
Page 23: Cleaning The Air Filter
5. Main te nance 5.5.3 Clean ing the air fil ter Change the fil ter el e ment: – if the fil ter el e ment is dam aged Attention – if moist or oily de pos its are pres ent –... - Page 24 5. Main te nance 5.6 Main te nance work en gine – Hatz 5.6.3 Check the en gine oil level Im me di ately re place dam aged seals. Only the main te nance work which has to be per formed daily is in cluded in the Op er at ing Man ual.
- Page 25 5. Main te nance 5.6.5 Clean ing the air fil ter Change the fil ter el e ment: – if the fil ter el e ment or seal ing ring is dam aged Attention – if sooty de pos its are pres ent –...
- Page 26 5. Main te nance 5.7 Main te nance ma chine 5.7.2 Tight en ing torque 10.9 12.9 5.7.1 Clean ing ø For clean ing, do not use any flam ma ble or ag gres - ft lb ft lb ft lb sive ma te ri als.
-
Page 27: Screw Con Nec Tions
5. Main te nance 5.7.3 Screw con nec tions 5.7.4 Check ing the rub ber buff ers B3299092 Check the rub ber buff ers (1) for tears and out breaks, as well as for se cure fit. If they are dam aged, re place them im me di ately. B3299091 With vi brat ing de vices, it is im por tant to check in ter mit tently the screw con nec tions for tight ness. - Page 28 5. Main te nance 5.7.5 V-belt: Ten sion / Con di tion – APR 2220 / 2620 5.7.6 V-belt: Ten sion / Con di tion – APR 3020 / 3520 • • Re move V-belt guard. Re move V-belt guard.
- Page 29 5. Main te nance 5.7.7 Ex citer: Oil level / Oil change • Fill-in new oil through the oil fill hole (1). See lu bri ca tion plan for quan tity and qual ity. Check / change ex citer oil when its warm. MOTORÖL APR 3520: The vent ing screw (3) must al ways first be un screwed when check ing the oil level or chang ing...
- Page 30 Hydro-oil HVLP 46 B3299020.cdr B8299325.cdr Ammann Ar ti cle No. AVP 3520 Man u fac turer/Month and year of man u fac ture Max. op er at ing pres sure The func tion of hy drau lic hose lines must be tested at reg u lar in - ter vals (min i mum once a year) by an ex pert (with a knowl edge of hy drau lics).
-
Page 31: Troubleshooting
6.1 Gen eral in for ma tion • If the cause of the fault can not be lo cated or rem e died, an authorised Ammann Ser vice Cen tre should be con tacted. • Ob serve the safety in for ma tion Al ways first check the most likely causes (fuses, LEDs, •...
Need help?
Do you have a question about the APR 2220 and is the answer not in the manual?
Questions and answers