Advertisement
Quick Links
Advertisement
Related Manuals for BBQ GO BG-BT1X
Summary of Contents for BBQ GO BG-BT1X
- Page 1 Smart Wireless BBQ Thermometer...
-
Page 2: Table Of Contents
CONTENTS Introduction Operating Instruction Download the App Install Probes Connect to your phone Specifications Warning... -
Page 3: Introduction
Introduction Probe Holding Channel Probe Port Power Button Indicator Light open DESIGNED BY INKBIRD Battery Cover... -
Page 4: Operating Instruction
Operating Instruction Battery Installation Open the battery cover ① Rotate the cover with a coin in the direction as indicated by the arrow. open DESIGNED BY INKBIRD Put battery in ② Battery Model Number Anode Cathode CR2032 LITHIUM BATTERY CR2032 LITHIUM BATTERY... - Page 5 Lock the battery cover ③ Rotate the cover clockwise to lock it. open DESIGNED BY INKBIRD Tips: The battery is well installed when the indicator flashes green and the BBQ device is ready to work. ON/OFF Turn on the device ①...
- Page 6 Turn off the device ② Press and hold the button for 3 seconds to turn off the ● device, the indicator light will turn red and goes out after 2 seconds, then the device is turned off. The device will turn off automatically if there’s no probe ●...
-
Page 7: Download The App
Download the App Search the Inkbird Pro app from Google Play or App Store to download it for free, or you can scan the QR code to download it directly. Please make sure all of the following requirements are ● met to download the app smoothly：... -
Page 8: Install Probes
Install Probes Insert the probes into the device when the power is ● turned on, then connect the device to your phone to check the instant temperature. Please make sure probes are inserted into the center of ● the food to get accurate temperature readings. Connect to your phone 1. - Page 9 Note: Please turn on GPS on your Android phone as Google Play requires it to work fully.Once the device is successfully paired with your phone, you will not need to pair it again unless you change your phone.
-
Page 10: Specifications
Specifications Size 60mm*60mm*20mm Short Time 0℃~310℃(32℉~590℉) Measurement Range Continuous 0℃~250℃(32℉~482℉) Monitoring Range ±1℃/±1.8℉ Temperature Accuracy Temperature ±7℃/±12℉ Calibration Range iOS 10.0 or above, Android 4.4 or above Compatibility 50 meters Wireless Range Power 1 X CR2032Button Battery Warning The maximum temperature for short time measurement ●... - Page 11 Do not put probes or metal wire into fire or contact the ● heating tube directly. Do not put probes or the metal wire into water, it may ● lead to inaccurate measurements. Do not press probes and the metal wire too hard, it ●...
Need help?
Do you have a question about the BG-BT1X and is the answer not in the manual?
Questions and answers