1. Manuals
  2. Brands
  3. Transition Networks Manuals
  4. Adapter
  5. TNIC-1500-AF
  6. Manual

Transition Networks TNIC-1500-AF Manual

Tnic adapter card
Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
Enlarged version
TNIC ADAPTER CARD
SPECIFICATIONS
Standards
IEEE 802.2, 802.3
Physical
Dimensions
4.80" X 2.77" X 0.95"
(122mm x 70mm x 24mm)
MTBF
TNIC-1500T
TNIC-1500TA2
TNIC-1500-TF
TNIC-1500- AF
TNIC-1500-PCI-T
Environment
Temperature:
0-50°C (32° to 122° F )
Humidity
10-90%, non condensing
Altitude
0-10,000 feet
Warranty
2 years
2,300,000 hours
1,660,000 hours
762,000 hours
762,000 hours
1,179,000 hours
TNIC Adapter Card
(TNIC-1500T, TNIC-1500TA2, TNIC-1500-TF,
TNIC-1500-AF, TNIC-PCI-T)
For assistance in installing, using, or
maintaining the TRANSITION Networks
TNIC Adapter Card, contact
TRANSITION Networks Technical
Support
at:
(800) 260-1312
or contact your local distributor.
7355.B

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the TNIC-1500-AF and is the answer not in the manual?

Questions and answers

Related Manuals for Transition Networks TNIC-1500-AF

Summary of Contents for Transition Networks TNIC-1500-AF

  • Page 1 10-90%, non condensing Altitude 0-10,000 feet Warranty 2 years TNIC Adapter Card (TNIC-1500T, TNIC-1500TA2, TNIC-1500-TF, TNIC-1500-AF, TNIC-PCI-T) For assistance in installing, using, or maintaining the TRANSITION Networks TNIC Adapter Card, contact TRANSITION Networks Technical Support (800) 260-1312 or contact your local distributor.
  • Page 2 CAUTION: RJ connectors are NOT INTENDED FOR CONNECTION TO THE PUBLIC TELEPHONE NETWORK. Failure to observe this caution could result in damage to the public telephone network. Der Anschluss dieses Gerätes an ein öffentlickes Telekommunikationsnetz in den EG-Mitgliedstaaten verstösst gegen die jeweligen einzelstaatlichen Gesetze zur Anwendung der Richtlinie 91/263/EWG zur Angleichung der Rechtsvorschriften der Mitgliedstaaten über Telekommunikationsendeinrichtungen...

  • Page 3: Table Of Contents

    Table of Contents TNIC Adapter Cards/Software ......1 The TNIC Family of Adapter Cards ....2 LED Status Indicators .

  • Page 4: Introduction

    LANs, is assumed. TNIC Adapter Cards/Software The TRANSITION Networks TNIC Family of Adapter Cards (TNIC- 1500T, TNIC-1500TA2, TNIC-1500-TF, TNIC-1500-AF, TNIC-PCI-T), provides an integrated hardware/software interface between a PC and various 802.3 Ethernet compliant media. Driven by software installed in the PC in which the adapter card is...

  • Page 5: The Tnic Family Of Adapter Cards

    1500 Adapter Cards identifies the connectors: T = twisted pair (10BaseT) A = AUI (connects to 10Base5) In installations of TNIC Adapter Cards with more than one media connector, only one connector (site-selectable using jumpers) can be active at a time.

  • Page 6: Led Status Indicators

    LED Status Indicators TNIC PCI Card LINK Illuminated when link is established. Active LINK Active Flashes during data transmission and reception. TNIC 1500T Card LINK Illuminated when link is established. Transmit Transmit Flashes during data transmission. Receive Flashes during data reception.

  • Page 7: Tnic Adapter Cards Install Software

    TNIC 1500n Cards UTPD ENABLE UTPD ENABLE XMIT XMIT POL OK POL OK LINK LINK TNIC Adapter Card INSTALL Software Illuminated when AUI connection is established. Flashes during data transmission. Illuminated when 10BaseT connection is established. Flashes during data reception. Illuminated when link is established.

  • Page 8: Install Main Window

    TNIC card to be compatible with other card settings in the system. If multiple adapter cards are present, the INSTALL utility permits the user to select each adapter card in turn and to modify the adapter card configuration settings as needed.
  • Page 9 Twisted Pair Connector/10BaseT Connection To connect 10BaseT Cable to TNIC Adapter Card RJ-45 connectors: 1. Locate or build 10BaseT cables with the following characteristics: • 803.2 compliant (See page 14) • correct (straight through) cable configuration for site installation (See page 6) •...

  • Page 10: Install Automatic Card Configuration Window

    Selecting Configure allows the system to accept proposed values and configure card Fiber Optic Connector/10BaseFL Connection The fiber optic adapter cards provides one set of transmit (TX) and receive (RX) ST connectors to fiber optic cable. Ensure that cable installed at transmit (TX) connector of adapter card is installed at receive (RX) connector of device at other end of fiber cable;...

  • Page 11: Installcustom Card Configuration Window

    • • • The TNIC-1500x adapter cards require the user to set the appropriate jumpers on the adapter card. After setting the jumpers and inserting the O A X card, the user must enter the I/O address, DMA Channel, and IRQ AI R Level in the Custom Card Configuration Window.

  • Page 12: Install Tnic Driver Installation Window

    INSTALL TNIC Driver Installation Window TNIC Driver Installation Window Card Name Bus Type Ethernet Address *TNIC-PCI 00:00:00:00:00:00 Device Driver Selection Novell DOS ODI Client Driver Automatic Port Selection A:\NOVELL\WKSTN\DOSODI Automatic Port Selection C:\Netware Instructions 1. Select the TNIC Card from Card List. 2.

  • Page 13: Install Diagnostics Window

    Installing Configuration and Driver Software To install the card configuration and driver software: 1. Make sure HIMEM.SYS is present in the CONFIG.SYS file. 2. Insert Disk 1 of the TRANSITION Networks Universal TNIC Driver Disk into the floppy drive. NOTE: To run INSTALL faster, copy the disk contents to a temporary directory on the system hard drive.

  • Page 14: Site Considerations

    2. SITE CONSIDERATIONS The site for the TNIC Adapter Card must provide: • Personal Computer (PC) with Microsoft DOS 3.3 or higher • AC power outlet for PC • Adequate ventilation • Standard environmental conditions • Isolation from electrical noise, including radio transmitters and broadband amplifiers, motors, high power electrical lines, or fluorescent light fixtures.

  • Page 15: Installation

    The TNIC Adapter Card packing contents should include the following: Coax AUI 10BaseT AUI/Coax Item TNIC Adapter Card Universal TNIC Driver Disk (set of 2) User’s Guide 10BaseT AUI/Fiber Fiber Coax AUI 10BaseT AUI/Coax TNIC Adapter Card Part Number TNIC-1500T TNIC-1500TA2 TNIC-1500-TF TNIC-1500-AF TNIC-PCI-T 7210 7355...

  • Page 16: Setting Jumpers On 1500-X

    Setting TNIC Adapter Card Jumpers NOTE: TNIC PCI Adapter Cards do NOT requre setting jumpers. Setting Card Configuration Jumpers TNIC Adapter Cards are shipped with the following default setttings: DMA Channel Selection Interrupt Request Selection I/O Address Selection 300h Boot PROM DISABLED (TNIC PROMS are ON at the position where the jumper is installed.)

This manual is also suitable for:

Tnic-1500ta2Tnic-1500-tfTnic-pci-tTnic-1500t

Table of Contents