Download Print this page

Supplied Parts - BONTEC ST-13 Installation Manual

Universal tv stand base table top stand
Hide thumbs Also See for ST-13:

Advertisement

 
Carefully open the carton, remove contents and lay out on cardboard or other
protective surface to avoid damage.
Check package contents against the Supplied Parts List in the next page to
assure that all components were received undamaged. Do not use damaged
or defective parts.
Carefully read all instructions before attempting installation.
  
Install and operate this device with care. Please read this instruction before
beginning the installation, and carefully follow all instructions contained herein.
Use proper safety equipment during installation.
Please call a qualified installation contractor for help if you:
If you don't understand these directions or have any doubts about the safety of
the installation.
If you are uncertain about the nature of your wall, consult a qualified installation
contractor.
Do not use this product for any purpose or in any configuration not explicitly
specified in this instruction. We hereby disclaim any and all liability for injury
or damage arising from incorrect assembly, incorrect mounting, or incorrect
use of this product.

Supplied Parts

TV Plate
A (X2)
Support Column
E (X1)
Metal Washer
Ø6.5 X Ø12 X 1.2
I (X10)
TV Plate
B (X1)
Support Column
F (X1)
M6x30 Bolt
J (X3)
Monitor Bracket
C (X2)
Plastic Socket
G (X1)
Metal Pad
K (X1)
1
Tempered Glass
D (X1)
M6x10 Bolt
H (X10)
Rubber Foot
L (X6)

Advertisement

loading