Related Manuals for Herzberg HG-8058
Summary of Contents for Herzberg HG-8058
- Page 2 Dear users, Thanks for selecting the HG-8058 advanced garment steamer! Before using the steamer, please carefully read the operating manual, which provides important safety guidelines. 1. Please use standard supply voltage (AC220-240V, 50-60Hz). The connection of incorrect voltage may damage the steamer and cause invalidation of the warranty.
- Page 3 18. Any person with reduced physical, sensory, mental or action capabilities (including children) or lack of experience and relevant cognition is not recommended to use the steamer, unless he obtains clear directions of safely using the steamer from his guardian. 19.
- Page 4 I. Product Components II. Product Parameters Model No.:HG-8058 Capacity of water tank: 1.2L Steam pre-heating time: approximate 40 seconds Voltage: 220-240V 50- 60Hz Output power: 2500W...
- Page 5 III. Functional Characteristics 3.1 Display panel of main body 3.2 Functional buttons on handle...
- Page 6 3.3 Knob of nozzle Before using, the nozzle can be adjusted according to the ironing requirements, and the nozzle panel can be rotated leftwards for 90 degrees by press the knob. Warning!! 1. If the temperature for the bottom plate of the nozzle does not reduce to the room temperature, do not adjust the nozzle angle so as to avoid burning by high temperature.
- Page 7 V. Pre-heating and Standby VI. Assembly of Product 6.1 Assembly of clothes hanging bracket...
- Page 8 6.2 Placement of main body 6.2.1 Install the flat ironing board into the rotary nozzle;...
- Page 9 6.2.2 After extending the extendable rods and regulating to the appropriate height, lock the buckle, and place the rotary nozzle into the nozzle hanging bracket. 6.2.3 Place the main body, and the installation is finished.
- Page 10 VII. Operating Guide 7.1 Water filling of water tank Open the water filling plug, fill about 1.2L water into the water tank, and tightly press the plug of the water tank. Warm tips: In order to elaborate the maximum performance and realize a longer service time, please use purified time.
- Page 11 7.2.4 According to the ironing requirements, the steam gear and the temperature gear switch can be set at will so as to set the required gear; 7.3 Debugging of ironing board...
- Page 12 7.4 Ironing of clothes 7.4.1 Steam ironing of clothes (rotate the nozzle into 90 degrees) ℃ ℃ Set temperature into 200 or 180 , and the steam ironing function cannot be used at other temperature gears. The steam gear can be set by the user himself as required, when the temperature indicator lamp stops flashing, press the steam button switch to conduct ironing.
- Page 13 VIII. Usage of Accessory Parts 8.1 Usage of clothing clip When iron the clothing in a hanging manner, install the clothing clip into the collar hanging bracket, clamp the clothing by moving the clips on both sides according to the size of clothes to be ironed, and then iron the clothes;...
- Page 14 IX. Maintenance and Cleaning 9.1 Shutdown and cooling 9.1.1 Long press the power switch of the main body for 3 seconds, the main body gives out a buzzing sound of “beep”, then the steamer is shut down, the power indicator lamp is OFF, pull out the power plug, and wait for at least 30 minutes until the steamer is cooled.
- Page 15 X. Notes to Maintenance 10.1 Remove the steam brush on the steam head, and then use wet cloth to clean. 10.2 Do not use rough or abrasive detergent or solvent. 10.3 Do not soak the steamer into water or other liquid. 10.4 Do not enable it to fall, and do not throw or attempt to bend it.
- Page 16 XI. Guidelines to Troubleshooting Problem Possible Solutions ⚫ It does not heat. Check whether the plug is correctly plugged. ⚫ Check the power supply and switch on it. ⚫ It has little steam, or it does not Check whether the water tank is correctly generate steam.
Need help?
Do you have a question about the HG-8058 and is the answer not in the manual?
Questions and answers