BorMann Elite BHA1900 Instruction Manual page 7

EN
Cleaning
When cleaning the appliance, you should pay attention to the following points:
• Remove plug from the mains socket, and allow the appliance to cool down before cleaning it.
• Do not immerse the motor section of the appliance in water and make sure no water enters the appliance.
• Clean the motor section by wiping it with a damp cloth. A little detergent can be added if the appliance is heavily soiled.
• Do not use scouring pads, steel wool or any form of strong solvents or abrasive cleaning agents to clean the appliance, as they may damage the outside
surfaces of the appliance.
• Take the appliance apart and clean all of the accessories separately. all of the accessories separately can be cleaned in warm water.
• Be careful not to touch the blades or sharp parts during use and cleaning.
• IMPORTANT! Allow to dry fully after cleaning before using again. Do not use the appliance if damp.
• After washing and drying, immediately place attachment into the protective sleeve for storage.
EN
* The manufacturer reserves the right to make minor changes to product design and technical specifications without prior notice unless these changes significantly affect the performance and safety of
the products. The parts described / illustrated in the pages of the manual that you hold in your hands may also concern other models of the manufacturer's product line with similar features and may not be
included in the product you just acquired.
* Please note that our equipment has not been designed for use in commercial, trade or industrial applications. Our warranty will be voided if the machine is used in commercial, trade or industrial businesses
or for equivalent purposes.
* To ensure the safety and reliability of the product and the warranty validity, all repair, inspection, repair or replacement work, including maintenance and special adjustments, must only be carried out by
technicians of the authorized service department of the manufacturer.
7
WWW.BORMANNTOOLS.COM