EN
Operating positions
Warning!
Operate the appliance only when the accessory/tool is attached according to this table and is in the operating position.
Risk of injury from the rotating tools!
While the appliance is operating, keep fingers clear of the mixing bowl.
Do not change tools until the appliance is at a standstill and have been unplugged. When switch off, the drive continues running briefly.
POSITION
1.
2.
How to Use Kneating Hook, Flat, Beater, Whisk
4
ACCESSORY
Set up kneating hook, mixing hook, wisk, according to your desire
WWW.BORMANNTOOLS.COM