Advertisement
INPUT LED
HDMI
3
OUTPUT
LED
SERVICE
4
port
EDID
5
Dial switch
6
(4K→
1080P)
device with a HDMI cable.
These blue LEDs will illuminate when the
HDMI OUT port has connected an active
display device with a HDMI cable.
Firmware update. (Manufacturer use only.)
AUTO: Compare OUT 1 and OUT 2 displays
EDID setting, then output the best resolution
to source device, the source will transmit the
signal again to all outputs.
COPY: Copy the HDMI OUT 1 port EDID setting
to source device, the source device will
transmit again the signal to all outputs.
OFF: When the dial switch is in'OFF'
position, signal input and output is bypass
status.
ON: When the dial switch is in'ON'position,
signal input will downscale (4k->1080P )
output.
7
Advertisement
