Table of Contents
Advertisement
Quick Links
MIL•03F
Fiber•MAU FDX
Full-Duplex Fiber Optic
Transceiver
FIBER•MAU
Model: MIL•03F
ETHERNET FULL-DUPLEX
10BASE-FL
TRANSCEIVER
Power Required: 12 VDC 200 mA
FCC PART 15 CLASS A
COMPLIANT
CX
TX
RX
PWR
LINK
TX
RX
Installation Guide
With LinkSentry™
Ethernet/IEEE 802.3
This guide includes the following information:
"Introduction" on page 2
"Installation" on page 2
"Configuration" on page 2
"DIP Switch" on page 2
"Jumper Settings" on page 3
"Diagnostic LEDs and Conditions Indicated" on page 3
"Legal" on page 4
Doc. #: 90000109 Rev. A
Advertisement
Table of Contents
Related Manuals for MiLAN MIL-03F
Summary of Contents for MiLAN MIL-03F
-
Page 1: Installation Guide
MIL•03F Fiber•MAU FDX Full-Duplex Fiber Optic Transceiver FIBER•MAU Model: MIL•03F ETHERNET FULL-DUPLEX 10BASE-FL TRANSCEIVER Power Required: 12 VDC 200 mA FCC PART 15 CLASS A COMPLIANT LINK Installation Guide With LinkSentry™ Ethernet/IEEE 802.3 This guide includes the following information: “Introduction” on page 2 “Installation”... - Page 2 3. Tighten the latch screws to secure the unit. 4. Restart the computer. The PWR LED illuminates. Note: If the PWR LED did not illuminate, reinstall the MIL-03F. If it still does not illuminate, contact our technical support department. C o nfi gu ra t i o n The MIL-03F comes with configurable options, which include a 2-position DIP...
- Page 3 • CX (Collision): Collisions are occurring on the network. • RX (Receive): Packets are being received from the network. • LINK (Link): The fiber optic link is good. Model: MIL-03F DIP Switch 3-Pin jumper (with jumper clock installed) Figure 1.Inside the MIL-03F...
- Page 4 Legal Regulat o r y A pprovals • FCC Class A • UL 1950 • CSA 22 No. 950 • EN60950 • – EN55022 Class B – EN50082-1 Canad ia n EM I No tice This Class A digital apparatus meets all the requirements of the Canadian Interference-Causing Equipment Regulations.
Need help?
Do you have a question about the MIL-03F and is the answer not in the manual?
Questions and answers