Table of Contents
Advertisement
106 Seats and stowing
If you no longer require the seat backrest to be
folded down for loading or for getting in and out,
fold it back into place.
& WARNING Risk of becoming trapped if the
seat is not engaged
The seat does not engage when folded for-
wards. The seat can fold backwards unexpect-
edly, e.g. when accelerating, braking or in the
event of an abrupt change of direction or an
accident.
People in the seat's sweep can become trap-
ped.
If a seat is folded forwards, always fold it
#
back before driving off.
Make sure that the seat is engaged.
#
If a seat on the second row of seats is not
engaged, this will be shown on the multifunction
display on the instrument cluster.
Requirements:
The area into which the rear seat is folded is
R
clear.
The rear seat has been folded up.
R
Vehicles with comfort seating: the center arm-
R
rest is folded up.
Vehicles with an extended center console: the
R
stowage compartment in the center console is
closed.
Vehicles with a folding rear armrest: the rear
R
armrest has been folded up.
Vehicles with center seat backrests: the cen-
R
ter seat backrest has been folded up.
Folding the rear seat into the front position
You can fold the seats on the second row of seats
forwards for the following situations:
For easier access to the cargo compartment
R
Vehicles with a third row of seats: for getting
R
in or out
Vehicles with a center seat backrest: the center
rear seat folds forwards and backwards together
with the left rear seat.
Depending on the vehicle equipment, you can fold
the rear seats forwards as follows:
Six-seater: on the right-hand side of the vehi-
R
cle only
Seven-seater with center seat backrest: both
R
sides
%
To increase the size of the cargo compart-
ment, you can move the seat backrests into
the cargo compartment floor position
(
page 130).
/
Advertisement
Table of Contents
