Table of Contents
Advertisement
GETTING STARTED
BATTERY REMOVAL AND INSTALLATION
Make sure the unit is turned OFF.
1.
2. Locate the battery cover on the back of the unit. Use a
screwdriver to loosen the screw and then open the battery
cover.
3. If used batteries are present, remove these batteries from
the unit by pulling up on one end of each battery.
4. Install 2 new AAA (AM-4/LR03) batteries following the
diagram inside the battery box. (For best performance,
alkaline batteries or fully charged Ni-MH rechargeable
batteries are recommended).
5. Replace the battery cover and tighten the screw to
secure.
4
Advertisement
Table of Contents
