Symbols - RIDGID R86230 Operator's Manual

SYMBOLS

The following signal words and meanings are intended to explain the levels of risk associated with this product.
SYMBOL SIgNAL
DANgER:
WARNINg:
CAUTION:
CAUTION:
Some of the following symbols may be used on this product. Please study them and learn their meaning. Proper
interpretation of these symbols will allow you to operate the product better and safer.
SYMBOL
Safety Alert
V Volts
min Minutes
Direct Current
n o
No Load Speed
.../min Per Minute
Wet Conditions Alert
Read The Operator's Manual
Eye Protection
Hot Surface
Recycle Symbols
Li - Ion
MEANINg
Indicates an imminently hazardous situation, which, if not avoided, will result
in death or serious injury.
Indicates a potentially hazardous situation, which, if not avoided, could result
in death or serious injury.
Indicates a potentially hazardous situation, which, if not avoided, may result in
minor or moderate injury.
(Without Safety Alert Symbol) Indicates a situation that may result in property
damage.
NAME
Indicates a potential personal injury hazard.
Voltage
Time
Type or a characteristic of current
Rotational speed, at no load
Revolutions, strokes, surface speed, orbits etc., per minute
Do not expose to rain or use in damp locations.
To reduce the risk of injury, user must read and understand
operator's manual before using this product.
Always wear safety goggles or safety glasses with side shields and,
as necessary, a full face shield when operating this product.
To reduce the risk of injury or damage, avoid contact with any hot
surface.
This product uses nickel-cadmium (Ni-Cd) and lithium-ion
(Li-Ion) batteries. Local, state or federal laws may prohibit disposal
of batteries in ordinary trash. Consult your local waste authority
for information regarding available recycling and/or disposal
options.
5 - English
DESIgNATION/EXPLANATION