Frigidaire FHWC282WB2 Use & Care Manual page 13

YOU WILL SEE:
Remote Sensing indicator
NOTE: Unit display shows the set
temperature. Remote display is actual
temperature.
The Remote Sensing function can be
terminated either by pressing the Remote
Sensing button again or the main ON/OFF
button on the unit.
TO CHANGE TEMPERATURE DISPLAY:
DO THIS:
PRESS AND HOLD THE UP/DOWN
BUTTONS SIMULTANEOUSLY
FOR 3 SECONDS
YOU WILL SEE:
Note: The control is capable of displaying
temperature in degrees Fahrenheit or
degrees Celsius.
OPERATING INSTRUCTIONS
TO TURN UNIT OFF:
YOU WILL SEE:
FAULT CODES:
If the display reads "AS" , a sensor has failed.
Contact your Authorized Frigidaire Service
Center.
ADDITIONAL THINGS YOU SHOULD KNOW
Now that you have mastered the operating
procedure, here are more features in your
control that you should become familiar
with.
The "Cool" circuit has an automatic 3
minute time delayed start if the unit is
turned o and on quickly. This prevents
overheating of the compressor and possible
circuit breaker tripping. The fan will
continue to run during this time.
DO THIS:
PRESS
ON/OFF BUTTON
NOTE
13