Subscribe to Our Youtube Channel
Related Manuals for Cineo Matchstix 2700
Summary of Contents for Cineo Matchstix 2700
- Page 1 User Guide Revision 1.0 — July, 2014 Information and specifications in this document are subject to change without notice. c i n e o l i g h t i n g . c o m...
- Page 2 2mm co-ax DC power connector Matchstix (7.5m) of cable. are available in 3”, 6” and 12” lengths and Cineo Matchstix are perfect for any film or draw approximately 100mA per inch of television project, in the studio or on location, length.
-
Page 3: General Notes
General Notes 1. Please read through this manual carefully before operating Cineo Matchstix, and keep this manual for future reference. 2. There are numerous safety instructions and warnings that must be adhered to for your own safety. 3. Matchstix not intended for residential use. It is intended for use in a professional studio. - Page 4 The lamphead includes a 5.5mm x 2mm co-ax connector for supplying power. Please note that there are many different co-ax connectors that look very similar, and are not interchangeable. All products purchased from Cineo or LiteGear maintain complete compatibility by adhering to the 5.5mm x 2mm connectors.
- Page 5 LiteDimmer Single The LiteGear LiteDimmer Single is a basic flicker-free controller for nearly all configurations of Matchstix implementations. The maximum current load that can be controlled on a singe LiteDimmer is 8A, meaning that up to a combined 8 feet of Matchstix can be controlled on a single dimmer.
- Page 6 Matchstix Cables and Splitters Cineo Matchstix use a 2-conductor, 26AWG cable with 5.5mm x 2mm coax female connector to mate with the lamphead. Lampheads are typically supplied with 12 feet (4m) cables, although shorter lengths are available friom Cineo, LiteGear or other suppliers. Cineo and LiteGear also supply specialized cables for connecting Matchstix to automobile power ports and D-Tap connectors commonly found on camera batteries.
-
Page 7: Specifications
Mounting and Accessory Attachment Cineo Matchstix feature a standard camera cold-shoe running the length of the lamphead, which is ideally suited for connecting the fixtures to virtually any surface using commonly available grip equipment. All Matchstix kits are shipped with a swiveling adapter that provides a standard ¼”... - Page 8 LiteGear Dimmers LiteDimmer Single Dimmer Weight: 0.682 lb. (10.912 oz), (309 g) Dimensions: 3 3/4”l x 2 7/8”w x 1 1/2d” Suitable AWG sizes for I/O: 26AWG to 12AWG max. DC Power Rating: 12V/24V DC, 5A per channel or 16A total current. DC Connector: Phoenix Contact, Combiconn 5.08mm, 7 pin (or 2+5) E-Control 4x4 V3 DMX Controller Weight: 0.682 lb.
- Page 9 CINEO LIGHTING LIMITED PRODUCT WARRANTY Reseller shall pass through to Customers CINEO’s limited product warranty for Products it resells set forth on CINEO’s website at www.cineolighting.com. EXCEPT FOR THE FOREGOING WARRANTIES, CINEO HEREBY DISCLAIMS AND EXCLUDES ALL OTHER WARRANTIES, EXPRESS OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE.
- Page 10 12” 6” 3” R14 CRI: Specifications are subject to change without notice. Cineo Lighting, TruColor and TruColor HS and LS are registered trademarks of Cineo Lighting, Inc. ©2013 Cineo Lighting, Inc. v07.21.14 info@cineolighting.com c i n e o l i g h t i n g . c o m...
Need help?
Do you have a question about the Matchstix 2700 and is the answer not in the manual?
Questions and answers