Bixpy J-2 User's Manual And Safety Manual page 6

RUNNING YOUR CABLES
Make sure your cables makes a clean exit out of your motor and around your adapter. Don't make
sharp bends, pull the cable or try to modify the cable in any way. Doing so may damage the signal
wire cores inside and prevent your device from running.
If you are using a fin or rudder adapter, simply run the cable
from your motor to your battery. Use zip-ties or cords to
secure your wire and prevent it from dangling or snagging.
If you are using a Bixpy Adapter with a vertical pipe, you can
use the provided Bixpy Wire Clips (1) and zip-ties to secure
the cable to your adapter pipe and run the cable as far up
the adapter pipe as you desire before running it to your
Bixpy Power Pack.
1
Additional Bixpy Wire Clips are available for purchase at
www.bixpy.com.
E
5