ROBAND ROBATHERM RM1434 Instruction Manual

ROBAND ROBATHERM RM1434 Instruction Manual

Commercial microwave oven

Advertisement

Quick Links

Proudly Distributed By
Instruction Manual
COMMERCIAL MICROWAVE OVEN
RM1434
Version 1

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the ROBATHERM RM1434 and is the answer not in the manual?

Questions and answers

Summary of Contents for ROBAND ROBATHERM RM1434

  • Page 1 Proudly Distributed By Instruction Manual COMMERCIAL MICROWAVE OVEN RM1434 Version 1...
  • Page 2 Do not remove any cover panels from the (includes handle and (W x D x H) machine. standoff) Roband will accept no liability if the instructions in Net Weight 20Kg this manual have not been followed *Specifications subject to change...
  • Page 3 Roband. Internal maintenance should only be Eggs in their shell and whole hard-boiled eggs performed by a Roband or one of our service should not be heated in microwave ovens since agents in order to avoid a hazard.
  • Page 4 position. Connect only to a RCD protected, INSTALLATION grounded 3-pin outlet. IMPORTANT: DO NOT USE THE MICROWAVE OPERATION DOOR HANDLE TO LIFT THE MICROWAVE OVEN. Any damage to the machine as a result of freight must be reported to the Freight Company and to the agent responsible for the dispatch of machine within 24 hours of receipt.
  • Page 5 3. Select desired power by pressing ‘HOLD - 0%’, 6. Press ‘START’ to begin cooking or ‘STOP’ to ‘DEFROST – 20%’, ‘MEDIUM - 50%’ or ‘MED cancel programming. -HI - 70%’. When a staged program is run the microwave will NOTE: The microwave will operate at 100% run through each stage automatically without user power if no power level is selected.
  • Page 6 DOUBLE QUANTITY COOKING Number Cooking Time Power Level The cooking times of programmed menus can be 0:10 100% adjusted for double the food quantity by pressing 0:20 100% ‘x2’, then pressing the desired programmed menu number within 5 seconds. Alternatively 0:30 100% select the desired program the press ‘x2’.
  • Page 7 After modifying desired settings, press ‘STOP’ Press and hold ‘START’ and ‘0’ together until and close the door. display shows ”00” then release. Press ‘START’, the display will show “CLEAR” Option Setting Description then “CHECK” then “11” the oven is now OP:10 3 seconds beep reset.
  • Page 8 Tubular Heating Elements is not a warranty fault. Roband or any subsidiary company or Agent shall not be liable for loss of profit or damage to other equipment and property except where it is in breach of the guarantees provided in accordance with applicable legislation.

Table of Contents