Advertisement
How to clean and assemble the dust
box and separator
Cleanse the dust box, separator and its
cover with running water.
1
Attach the cover by inserting the spiral in the
cover into the groove.
3
Attach the assembled dust box to the body of
the cleaner.
Warning:
If you move the cleaner by holding the carrying handle with the cover not fully closed, the cover
may open, causing damage to the parts and the dust box. So check if the cover has been properly
closed.
If you use the cleaner without assembling the cover of the dust separator, it will increase the noise
and reduce the inhaling power when cleaning. So check the assembling once again.
Dry them in the well-ventilated shade for
a day before using.
2
Assemble the dust separator and box.
2
Cover the cleaner by holding the carrying
handle of the body.
23
Advertisement
