Advertisement
The DW42 is intended for indoor use. Mount the amplifier on a flat surface with the screws provided. An Earth Point has
also been included if required.
Cable connections
The input/output cable connectors are 'F' Type.
Powering options
Local powering: The supply voltage (12-18V DC) for the DW42 is supplied by the separately purchased PSK18S or
PSK12S for powering.
Line powering: Achieved via the coaxial cable RF output socket. The PSK18M requires a PIK2400 accessory to adapt the
power to an 'F' connection (Fig. 2).
Adjustments
Remove lid to set the output level and select input options.
(Fig. 2)
Separate UHF/VHF Antennas
Current Consumption
Operating Temperature
PIK2400
PSK18M
PARAMETER
Frequency Range
Gain Control Range
Flatness
Noise Figure
Return Loss
Output Level
Supply Voltage
POWERING FEATURES
Option 1
Option 2
Radiation
Dimensions
Weight
Connectors
All values are typical unless otherwise specified.
INSTALLATION
Combined UHF/VHF Antennas
SPECIFICATIONS
SPECIFICATION
174-300 MHz 37dB max
470-860 MHz 40dB max
20dB (for each frequency range)
± 2dB
< 6dB
>10dB
118dBµ V @ -60dB IMR (DIN45004B)
12-18V DC
300mA
Locally – using PSK18S or PSK12S plug pack
Remotely using PSK18M & PIK2400
< 20dB pw
-10ºC to 50ºC
195 x 55 x 35mm
280 grams (approx)
'F' Type
PIK2400
PSK18M
Advertisement
