INTRODUCTION BENEFITS OF DECINA SHOWER BASES & WALLS Thank you for purchasing a quality Decina product and supporting an Australian owned company. This product has been manufactured to meet our quality DECINA SHOWER BASES assurance standards and in accordance with the following Australian Standards.
Inspect the product and all components (listed) prior to installation. b. Installation of damaged goods will void your Warranty c. Decina acrylic products shall not be used directly adjacent to any direct heat Spirit Level source above 70 degrees Celsius, as this may cause distortion of the product.
Class 2, 3 and 4 buildings. BCA 2006 Voume Two gives detailed waterproofing requirements for various • To ensure proper bond of the Decina • applications. These requirements are for all intents and purposes the same as shower products, the floor and wall those provided in AS 3740.
• for protection. in the weakening of the floor, as the Decina shower base does not form part of e. Ensure the floor surface is clean and dry. Apply a generous amount of building the building integrity. If weakened, the opening should be suitably reinforced to adhesive to the shower base self-supporting feet - suitable for concrete bond provide a structurally sound and flex resistant floor once complete.
Brasso, which has a mild abrasive action and tends to fill small scratches to make costs will be $500. Where the installation requires a relocation of the waste by an offset device, Decina will not offer a warranty against leakage unless a “through” waste connector is used (Recommended brand is Tacron).
Need help?
Do you have a question about the Luna 1000 SB1000R3T and is the answer not in the manual?
Questions and answers