REPEAT PLAYBACK
1
2
3
To repeat a single track, while in
the CD Stop mode, press the
REPEAT button once; the
REPEAT indicator will blink.
Press the SKIP/SEARCH o 2 or
n 3 button to select the specific
track that you wish to repeat.
When the desired track number
blinks in the display, within five
seconds, press the PLAY/PAUSE
(®p) button
to begin playback.
The specific track you selected
will be repeated continuously.
PROGRAMMED PLAYBACK
The CD player in this unit has a 19 track programmable memory that allows you to program up to 19 tracks
on any disc for playback in any desired order. You may program 19 different tracks or you may also program
certain tracks to play more than once.
To perform Programmed playback, proceed as follows:
1
1
2
Press the POWER button to
turn the unit on. Slide the
FUNCTION (CD+G/AUX) switch
to the CD+G position.
OPERATION (CONTINUED)
2
1
To repeat all of the tracks on a
disc continuously, while in the
Stop mode, press the REPEAT
button twice; the REPEAT
indicator will light solid. Press the
PLAY/PAUSE (®p) button to
repeat all tracks.
2
Press the OPEN/CLOSE area to
open the CD compartment door.
Place a CD in the compartment,
with the printed label side facing
up
and
close
compartment door.
CONTINUED ON THE NEXT PAGE
1
3
2
To cancel Repeat Playback,
press the REPEAT button until
the REPEAT indicator goes out.
You can also cancel Repeat
Playback by pressing the STOP
(I) button .
3
Press the PROGRAM button; "0"
will blink in the display and the
PROGRAM indicator will blink.
the
CD
1
11
2
1