Repeat Playback; Programmed Playback - Memorex MB2186A User Manual

MKS5009.OM.QXD 7/22/03

REPEAT PLAYBACK

1
1
3
To repeat a single track, press the
REPEAT button ❶ once; the
REPEAT indicator will blink.
Press the Skip/Search (
( ) button ❸ to select the
specific track that you wish to
repeat. When the desired track
number blinks in the display,
within five seconds, press the
PLAY/PAUSE (
begin playback. The specific track
you selected will be repeated
continuously.

PROGRAMMED PLAYBACK

The CD player in this unit has a 19 track programmable memory that allows you to program up to 19 tracks
on any disc for playback in any desired order. You may program 19 different tracks or you may also program
certain tracks to play more than once.
To perform programmed playback, proceed as follows:
1
1
Press the POWER button ❶; the
POWER indicator will light. Slide
the FUNCTION switch ❷ to the
CDG position.
PROGRAMMED PLAYBACK CONTINUED ON THE NEXT PAGE
1:35 PM Page 11
OPERATION (CONTINUED)
2
2
To repeat all of the tracks on a
disc continuously, press the
REPEAT button ❶ twice; the
) ❷ or REPEAT indicator will light solid.
Press the Play/Pause (
button ❷ to repeat all tracks.
) button ❹ to
2
2
Press the CD Door OPEN/CLOSE
area to open the CD compartment
door. Place a CD on the center
spindle, with the printed label side
facing up.
compartment door.
3
1
2
To cancel Repeat Playback,
press the REPEAT button ❶ until
the REPEAT indicator goes out.
You can also cancel Repeat
Playback by pressing the Stop
)
(■) button ❷.
3
Press the PROGRAM button; the
PROGRAM indicator and display
will blink.
Close the CD
11
1
2