Table of Contents
Advertisement
MKS8002.OM.QXD
8/5/03
8:30 AM
CONNECTING THE UNIT TO A TELEVISION
IMPORTANT NOTE: This unit does not have speakers, so you must connect it to a TV
and/or stereo.
NOTES FOR CONNECTING TO A TV:
•
Connecting the unit to a TV will allow you to broadcast the unit's sound through an external TV. If playing
a CD+G disc, you will also see lyrics on the external TV.
•
You must change your TV's INPUT selection to VIDEO IN or AUX IN. If the TV has a remote control,
press the INPUT or AUX button on the remote to change the input selection.
•
When connecting the unit, refer to the owner's manual of the TV, as well as this manual.
•
When connecting the unit to the TV, make sure the power is off and both units are unplugged before
making any connections.
•
If your TV only has one audio input, the use of a "Y" connector may be necessary. Visit your local
electronics supply store.
•
After connecting, set the Audio mode on the TV to the desired audio setting.
Page 7
CONNECTIONS (CONTINUED)
From
Video
Out
From
Audio
Out
7
To video
To
In
Audio In
TELEVISION
Advertisement
Table of Contents
