Panasonic SC-BTT490 Easy Setting Manual page 2

STEP 5: Connecting the cables
For information on other connection methods and the internet features, refer to the Owner's Manual.
PURPLE GREEN RED
Connect the speaker cables to the terminals of the same color.
STEP 6: Turning on the system

Connect the AC power supply cord.
(For units with PX printed on the packaging)
Before connecting the AC
power supply cord, set the
voltage at the bottom of
AC power
the main unit.
supply
cord
If the power plug does not
(supplied)
fi t your AC outlet, use the
AC plug adaptor (supplied).
To a household AC outlet
If it still doesn't fi t, contact an electrical
parts distributor for assistance.
HDMI cable (not supplied)
WHITE GRAY BLUE

Turn on the TV.
HDMI
Set the video input mode
220 240V
110 127V
to HDMI, etc.
VOLT ADJ
A video cable (not supplied) is required to view
photos/videos on the iPod/iPhone.
Optical digital audio FM indoor antenna (supplied)
cable (not supplied)
Not required if the HDMI
terminal of the TV is
labeled "HDMI (ARC)".
Affi x this end of the antenna to a wall
or pillar where the reception is best.
OPTICAL OUT

Turn on the system.
R6/LR6, AA
 

Press [ ]
The main unit shows the model
for the U.S.A.

The Easy setting starts.
Follow on-screen instructions.