Dvd Basic Operation; Playback Of A Dvd - Memorex MVD2022 User Manual

IMPORTANT NOTES:
• After plugging in, the unit will be in the Standby mode (the Standby indicator will be lit). Press the STANDBY ON/OFF
button on the main unit or the remote to turn on the unit.
• " " will appear on the TV screen during operation if you try to access a function that is not available on the disc.
• Some discs may take a few seconds to load.
• If a disc is inserted incorrectly, is dirty and/or damaged, or is not present at all, "NO DISC" will appear in the display.
• Always hold the disc without touching either of its surfaces. When inserting a disc, position it with the printed title side
facing up, align it with the guides and place it in its proper position.
• It is important that you read the manual that accompanies the DVD disc as there are features that are on this DVD
player that cannot be used with certain DVDs. There are also extra features that are different for each DVD disc, so they
are not explained in this owner's manual.

PLAYBACK OF A DVD

1
Press the STANDBY ON/OFF button to turn on the unit; the
STANDBY indicator will go out and the POWER ON
indicator will light.
3
1
2
3
Press the OPEN/CLOSE button ‚ to close the disc tray.
"CLOSE" will appear on the screen. After loading, "DVD
VIDEO" will appear on the screen and the menu screen of
the DVD should appear. Use the Navigation (¦,‹,œ,ƒ)
buttons ƒ to select the desired option and ENTER button „
to select it.
If the password is set and the inserted disc is within the
Parental Ratings set, then the Password screen will
appear, prompting you to enter the password.
NOTES:
• If a MENU appears on the TV screen, press the Navigation (¦,‹,œ,ƒ) buttons to select the desired option/item, then
press the ENTER button. Please make sure to refer to the disc's jacket or case for additional information.
• Resuming playback may not work on all discs.

DVD BASIC OPERATION

1
20
2
Press the OPEN/CLOSE button to open the disc tray,
"OPEN" will appear on the screen. Insert a disc will the
label side facing up on the disc tray.
4
2
To stop playback, press the Stop (I) button ‚; "PRESS
PLAY KEY TO CONTINUE" will appear on the TV screen.
Because the unit will remember where you stopped, simply
press the Play (‹) button ƒ to resume playback where you
left off (resuming playback).
If the Stop (I) button ‚ is pressed twice, the unit will stop
completely.
1