Table of Contents
Advertisement
➢ Mounting
Tools required for installation.
Installation tools: crimping pliers for crimping posts and RJ45, screwdriver, manual wrench etc.
Step 1: Drill 4 holes in the wall according to the following dimensions, 50~60mm depth. Then use a
proper hammer to fit the expansion bolt into the holes.
Step 2: Lift up the inverter and align the holes of the inverter with the expansion bolt, mount the
inverter on the wall.
Step 3: Tighten the nut of the expansion bolt and install an anti-theft lock on the DC switch of the
inverter.
15
Advertisement
Table of Contents
