Related Manuals for Ballard Designs WS989
Summary of Contents for Ballard Designs WS989
- Page 1 Customer Service: 800-367-2810 Online: www.ballarddesigns.com PRODUCT NAME: Chloe Wall Rack ITEM NUMBER: WS989 ASSEMBLED DIMENSIONS : 21”H x 43.75”W x 5” Deep PRODUCTS ARE NOT INTENDED MADE IN INDIA FOR COMMERCIAL USE. UPDATED: 7-13-2020 Page 1 of 4...
- Page 2 Assemble in location for intended use. REQUIRED TOOLS: Ltr. Qty. Hardware Included Phillips Screwdriver, Level, Pencil, Drill with 1/4” bit, Screws Painter’s Tape (optional) -Two person assembly suggested. Wall Anchors Remove all parts, hardware and protective packaging from carton and carefully arrange on a clean, level, padded surface.
- Page 3 STEP 1: Determine installation location for Wall Rack (C) and pencil mark wall for each Keyhole Bracket on back of Wall Rack. If possible, center one of the Keyholes over a Wall Stud and drive Screw (A) directly into Stud (Fig. 1). For Keyhole(s) located in open drywall (no Wall Stud present) use a Wall Anchor (B) with Screw.
- Page 4 How to Create a Template for Keyhole Brackets Place a strip of Painter’s Tape over both Keyholes on back of item to be hung. Use a Screwdriver or other pointed tool to punch a hole in tape at TOP of each Keyhole. PAINTER’S TAPE OF KEYHOLE Use a Level and Pencil to mark wall at installation location.
Need help?
Do you have a question about the WS989 and is the answer not in the manual?
Questions and answers