Getting Started; Turning On Your Computer; Sleep Mode; Shut Down - Coby NBPC1022 Instruction Manual

Basic Operation

Getting Started

Open the display panel and adjust it for comfortable viewing.

Turning On Your Computer

Press the power button to turn on the computer.

Sleep Mode

When you finish working with your computer, you can put it to sleep
or shut it down.
Use sleep mode if you will be away from your computer for only a
short time. To enter sleep mode:
Click the Start menu and select Sleep, or

Press Fn + Esc.

To wake the computer, press the Power button.

Wait until the power indicator light starts blinking (indicating
that the computer is in sleep) before you move your computer.
Moving your computer while the hard disk is spinning may
cause damage or loss of data.

Shut Down

Your computer should be shut down when not in use for 24 hours or
more. Enter the Start menu and select Shut Down to turn off the com-
puter.
Page 14 Coby Electronics Corporation