Advertisement
Quick Links
Advertisement
Related Manuals for Ramblegard Jill Pager
Summary of Contents for Ramblegard Jill Pager
- Page 1 Jill Pager (RG41) User Instructions...
- Page 3 The Ramblegard cordless Jill-LCD pager is a versatile tool for a caregiver in either a facility or home care environment. The large display is convenient for caregivers to read with easily cleanable buttons for a hospital setting. Options include tone selection for the hard of hearing,...
-
Page 4: Initial Configuration
NOTE: In most instances, the Jill will be sent out as part of a Ramblegard Kit and therefore will be preprogrammed for ease of use. If you do need to program an additional device, go straight to step 3. - Page 5 To exit programming see Note under point 8. Jill Pager Setting LCD Indicator Read-in Devices...
- Page 6 3.1 Read-in Devices (rd) cont. In the programming menu select “rd” These include: • Press OPTION to enter the menu, and a digit from 1-9 will start flashing in the center of the screen. • Use MENU to choose a memory slot from 1-9. •...
- Page 7 3.3 Direct Signaling (dS) This setting allows the pager to receive a signal directly from a cordless device, and has a factory default to ON. If a central monitor is used, this must be changed to OFF. The Doorgard anti-wandering system does not need to be “read- in”, but this setting must still be set to ON or the pager will ignore signal from it.
- Page 8 3.5 Reset (rE) Some facilities require that alarms be reset at the point of origin. This setting determines whether the RG41 can reset alarms for anti-wandering systems, bathroom alarms, or bed exit alarms. In the programming menu first select “rE” •...
- Page 9 CANCEL for ~5s. The screen will flash 0000000 several times and automatically exit the MENU. NOTE: Once you have correctly configured the Jill pager, press and hold the OPTION button for ~3s to exit program menu, then go back to Step 2 for normal operation.
-
Page 10: Troubleshooting
4.0 Troubleshooting • Check whether the programming settings are configured correctly • Erase the pager memory and reprogram the settings • Contact your local distributor with details for further assistance... - Page 12 T: 028 9448 3971 www.ramblegard.com S&E CareTrade t/a Ramblegard Elmfield House Rathenraw Industrial Estate Greystone Road Antrim BT41 2SJ...
Need help?
Do you have a question about the Jill Pager and is the answer not in the manual?
Questions and answers