Twoey Outside 2740 Assembly Instructions

OUTDOOR PERSPEX
PANEL
Assembly Instructions.
Please read these instructions carefully before assembling the unit
and where necessary refer to the enclosed Component List.
Additional Tools Required.
Maintenance.
Some residual dust from the manufacturing process may be apparent
This will wipe off with a damp cloth.
Make sure any drain holes are kept clear.
Examine all fasteners periodically and retighten where necessary.
Care must be taken not to over tighten the fasteners.
Weathering Effects.
Like all natural timbers when subjected to the elements, under certain
conditions, some surfaces may be susceptible to staining, moulds &
mosses. Though unsightly these conditions will not cause degradation
of the material. Should staining occur it is suggested that the surface
be cleaned with a mild detergent. Fading may occur if left in direct
sunlight for prolonged periods of time.
An Adult Should ALWAYS SUPERVISE PLAY!
This unit is designed for use on a flat level surface.
Please retain our address for future reference
2740 - Outdoor Perspex Panel (CS0769)
2740
Adults Required For Assembly.
Mike Miller Associates Ltd.,
Syke Road, Wigton. Cumbria CA7 9NS
Tel: 016973 49774/45300 Fax: 016973 45511
Email: info@twoey.co.uk
Website: www.twoeytoys.com
Registered in England No: 1425839
Registered Office: The Old Brewery, Caldbeck.
Manufactured by:
Cumbria CA7 8EW
20/10/2020
.