Twoey Outside 2650 Assembly Instructions Manual

2650
OUTDOOR HIDE-&-SLIDE
Assembly Instructions.
Please read these instructions carefully before assembling the unit
and where necessary refer to the enclosed Component List.

Additional Tools Required.

Maintenance.

Some residual dust from the manufacturing process may be apparent
This will wipe off with a damp cloth.
Examine all fasteners periodically and retighten where necessary.
Care must be taken not to over tighten the fasteners.

Weathering Effects.

Like all natural timbers when subjected to the elements, under certain
conditions, some surfaces may be susceptible to staining, moulds &
mosses. Though unsightly these conditions will not cause degradation
of the material, they may however cause the surface to become
slippery, should this occur it is suggested that the surface be
cleaned with a mild detergent before use
left in direct sunlight for prolonged periods of time.
THIS PRODUCT WILL NOT PROTECT ANY ITEMS STORED
WITHIN FROM THE WEATHER.
An Adult Should ALWAYS SUPERVISE PLAY!
This unit is designed for use on a flat level surface.
Please retain our address for future reference
2650 - Outdoor Hide-&-Slide (CS0754)
Adults Required For Assembly.
.
Fading may occur if
Mike Miller Associates Ltd.,
Syke Road, Wigton. Cumbria CA7 9NS
Tel: 016973 49774/45300 Fax: 016973 45511
Email: info@twoey.co.uk
Website: www.twoeytoys.com
Registered in England No: 1425839
Registered Office: The Old Brewery, Caldbeck.
Manufactured by:
Cumbria CA7 8EW
06/11/2020
.