Advertisement
When ordering the above procedure, setting of the model code, option code, tuning channel can
be skipped. / However, all electrical adjustment data is unique value in accordance with a deck,
perform the Electrical Adjustment continuously.
2.1.2. CYLINDER UNIT REPLACEMENT
1. CYLINDER UNIT REPLACEMENT
A. Remove the mechanism unit from MAIN C.B.A./Chassis by
referring "SECTION 2. Disassembly Procedure".
B. Remove the 3 screws (A) of the CYLINDER UNIT with a screw
driver.
C. Unlock the 4 locking tabs (B) and disconnect the Cylinder
fiexible card from the FPC Holder.
D. Remove the CYLINDER UNIT.
CAUTION:
Handle the Cylinder fiexible card with care. When it damaged, you
should replace whole Cylinder unit.
2. UPPER CYLINDER DISASSEMBLY
A. Remove 2 screws (A).
B. Remove the Cylinder Stator Unit.
C. Remove 2 screws (B).
D. Remove the Cylinder Rotor Unit.
E. Loose Hex screw (C) (1.5 mm) and remove the CYLINDER
RETAINER.
F. Remove the Upper Cylinder.
Fig. S3
Fig. S4
5
Advertisement
