Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for Admiral LTW32AC
Summary of Contents for Admiral LTW32AC
- Page 1 LTW32AC/CF/DF-SERVICE...
-
Page 2: Table Of Contents
5. ALIGNMENT ........8 9. PCB LAYOUT(LTW32AC) ......40 6. -
Page 3: Important Safety Notice
Important Safety Notice Many electrical and mechanical parts in this chassis have special safety-related characteristics. These parts are identified by in the Schematic Diagram and Replacement Parts List. It is essential that these special safety parts should be relpaced with same components as Recommended in this manual to prevent Shock, or File, or other Harzards. -
Page 4: Specifications
SPECIFICATION Panel Type TFT Color LCD Display Area 697.685 x 392.256(32"), 819 x 460(37"), 930x 523mm(42") Display Color 16.7 million Pixel Pitch 0.17 x 0.51(32"), 0.20x0.60(37"), 0.227x 0.681mm x RGB(42") Panel Resolution 1366 x 768 Analog RGB 15 pin D-sub Video S-Video In Video Input... -
Page 5: Location & Function Of Control
Front 1. TV/VIDEO Display a menu of the available input sources. 2. MENU Display the main on-screen menu. Exit from sub-menu. 3. VOL(+/-) Press the increase or decrease the volume. Also used to increase or reduce the value of a menu option. 4. - Page 6 Rear 32" 37"/42" 1. ANTENNA JACK Connect to an antenna or a cable TV system 2. AV OUTPUT Used to connect a video signal from a VTR or DVD 3. HEADPHONE Connect to an head phone 4. A/V IN Audio signals from VCR or similar device.(Audio input of A/V IN is used com- monly with SVHS) 5.
-
Page 7: Remote Control Operation
Point to remote control sensor of the TV set. The maximum operable distance is approximately 20 feet from the remote control sensor, and not more than 30 to either side of center. The operation of the remote control is most effective when there is nothing between it and the remote control sensor. -
Page 8: Alignment
FACTORY This mode uses the standard remote control. In the stand-by mode. Press display + MENU + 3 + 8 + Power(on) button on the remote controller in --> sequence The factory mode will be displayed. The factory mode has three components: Set option, Vol. -
Page 9: Technical Information
[1] IC501 : SVP-EX52(Trident) SERVICE MANUAL... - Page 10 SERVICE MANUAL...
- Page 11 SERVICE MANUAL...
- Page 12 SERVICE MANUAL...
- Page 13 SERVICE MANUAL...
- Page 14 SERVICE MANUAL...
- Page 15 SERVICE MANUAL...
- Page 16 SERVICE MANUAL...
- Page 17 SERVICE MANUAL...
- Page 18 SERVICE MANUAL...
- Page 19 SERVICE MANUAL...
-
Page 20: Ic001 : M30620
[2] IC001 : M30620 SERVICE MANUAL...
Need help?
Do you have a question about the LTW32AC and is the answer not in the manual?
Questions and answers