Download Print this page

SOGEDIS 371E Manual

Push button display

Advertisement

Quick Links

1. It enables the setting value of fridge to be modified and super cool mode to be activated
if desired. Freezer may be set to -16,-18,-20,-22,-24 °C, SF.
2. It is the Super Freeze mode symbol.
3. It is the alarm symbol.
4. It is the freezer set value screen.
Super Freezing Mode :
• To freeze plenty of food
How to use;
• Press set button until 'SUPER' led blink.
During this mode:
• Super freeze mode can be cancelled by the same
operation of selecting.
Demo mode :
This mode will be use for only sales points by salesman to show functions & modes to
customer without operating components as a compressor, fan, motor..Etc
Entering Demo mode:
•Firstly the power is on , with in 1 minute set the temperature to ''SUPER'' and user will push
''SET'' button for 10 seconds , Then appliance will go on "demo function" and Super LED
symbol will blink during the mode.
•All functions can be adjusted to show how they are adjusted to the customer.
Canceling Demo mode:
•For cancelling; Same operation will be used. If user will push SET button for 10 seconds,
demo function will be cancelled.
•When appliance is Demo mode; if plug is removed or there is an electricty breakdown;
demo mode will continue with current settings after user plug into or electricity breakdown
finish.
371E PUSH BUTTON DISPLAY
Display and Control Panel
1
NOVEMBER 2017

Advertisement

loading
Need help?

Need help?

Do you have a question about the 371E and is the answer not in the manual?

Questions and answers

Summary of Contents for SOGEDIS 371E

  • Page 1 371E PUSH BUTTON DISPLAY Display and Control Panel 1. It enables the setting value of fridge to be modified and super cool mode to be activated if desired. Freezer may be set to -16,-18,-20,-22,-24 °C, SF. 2. It is the Super Freeze mode symbol.
  • Page 2 371E PUSH BUTTON DISPLAY Display and Control Panel Temperature adjustment and activating SUPER COOLING Mode Initial temperature value for Freezer Setting Indicator is -18 °C. • Press set button once. • When you first push this button, the last value appears on the setting indicator of the freezer.
  • Page 3 371E PUSH BUTTON DISPLAY Fault Codes Sensor short open circuit defect on display USER MODE SERVICE MODE SENSOR TEMPERATURE REACTION REACTION >+50°C or <-50°C (1) Freezer -16 Set Symbol blinks (sensor is short or open) (2) Refrigerator (3) Defrost Short (< 100W) or <-50°C...
  • Page 4 371E PUSH BUTTON DISPLAY Service Mode Entering service mode: Push SET button continuously for 10 seconds when -24 set symbol active. Appliance will enter service mode 10 sec. later. Canceling service mode: Push SET button continuously for 10 seconds when -24 set symbol active. Appliance will enter service mode 10 sec.
  • Page 5 371E PUSH BUTTON DISPLAY REVERSING THE DOOR 1. Hold the top hinge cover and remove it toward 2.Unscrew the screws fixing the top hinge that direction (Picture-1) and remove it. (Picture-2) Picture-1 Picture-2 3. Displace the door (Picture-3) Picture-3 NOVEMBER 2017...
  • Page 6 371E PUSH BUTTON DISPLAY REVERSING THE DOOR 4. Unscrew the adjustable foot (Picture-4) 5. Unscrew the bottom hinge screws. (Picture-5) Picture-5 Picture-4 7. Screw the bottom hinge to the left bottom 6. Unscrew the bottom hinge pin and side of refrigerator. Screw the adjustable screw it to other hole.
  • Page 7 371E PUSH BUTTON DISPLAY REVERSING THE DOOR 9. Remove the hinge cover on the top panel and replace to other side.(Picture-9) Picture-9 10. Place the door to the bottom hinge and 11. Place the top hinge cover. (Picture-11) screw the top hinge to the top panel.
  • Page 8 371E PUSH BUTTON DISPLAY ASSEMBLE & DISASSEMBLE OF AIR DUCT Warning: Make sure the unit is unplugged. 1. Remove the refrigerator glass shelves and the flap cover supports left and right. (Picture-1 / Picture-2) Picture-1 Picture-2 2. Remove the plugs by pulling them under the base with a pointed device to remove the screw plugs and remove the screws.
  • Page 9 371E PUSH BUTTON DISPLAY ASSEMBLE & DISASSEMBLE OF FAN MOTOR 1. Remove the fan motor connector, unscrew the fan motor fixing screws and displace the fan motor and remove the propeller. (Picture-1 / Picture-2) Picture-1 Picture-2 2. Displace the details on the fan motor FAN MOTOR box.
  • Page 10 371E PUSH BUTTON DISPLAY ASSEMBLE & DISASSEMBLE OF FIN EVAP Warning: This process needs gas deflation, gas re-charging and welding processes so its need to be done by trained professionals. 1. Take out the fin evap heater (blue) connector and remove the bitumen covering the tubes.
  • Page 11 371E PUSH BUTTON DISPLAY ASSEMBLE & DISASSEMBLE DISPLAY Replacement Head Panel Display 1. By aid of a flat screwdriver or smilar tools remove taps and then unscrew 2. Unhook snapfits on the head panel by reaching from related cavities and pull head panel backward 3.
  • Page 12 371E PUSH BUTTON DISPLAY ASSEMBLE & DISASSEMBLE OF DISPLAY Replacement Head Panel and Main Board 1. First remove cover by pulling leftward as 2. Remove other cover by pulling backward shown below. from top side of the cover as shown below 3.
  • Page 13 371E PUSH BUTTON DISPLAY ASSEMBLE & DISASSEMBLE OF DISPLAY 4. Disassemble snapfits at the area marked with red circle at the picture below . It can be used any suitable tool to disassemble. 5. Unplug socket on the board assembled head panel.
  • Page 14: Assemble & Disassemble

    371E PUSH BUTTON DISPLAY ASSEMBLE & DISASSEMBLE 6. To reassemble head panel ; first plug socket mentioned before and then place detail on the head panel to related detail on the cover and then push head panel to place snapfits marked with red circle below.
  • Page 15 371E PUSH BUTTON DISPLAY ASSEMBLE & DISASSEMBLE OF DISPLAY 7. Then screw head panel with screwdriver and assemble covers and complete head panel assembly. 8. Pull cover backward and remove from housing NOVEMBER 2017...
  • Page 16 371E PUSH BUTTON DISPLAY ASSEMBLE & DISASSEMBLE OF DISPLAY 9. Then unplug all sockets. 10. To reassemble cover first plug all sockets related place on the board. NOVEMBER 2017...
  • Page 17 371E PUSH BUTTON DISPLAY ASSEMBLE & DISASSEMBLE OF DISPLAY 11. To reassemble cover pay attention to assemble with right direction. Details on the cover and housing should be matched eachother Cover Housing NOVEMBER 2017...
  • Page 18 371E PUSH BUTTON DISPLAY ASSEMBLE & DISASSEMBLE SENSOR Remove the freezer sensor cover by pulling forward and disconnect sensor connector. (Picture-1 / Picture-2) Picture-2 Picture-1 Warning: Pay attention not to damage to the sensor cover details! ASSEMBLE & DISASSEMBLE LED Remove the led cover by pulling forward and unscrew the two screws fixing the led and remove it.
  • Page 19: Information Technique

    INFORMATION TECHNIQUE CHASSIS 371E Activation du Mode Service Entrer dans le mode service: L'appareil entrera en mode service, en appuyant sur le bouton de réglage (repère 1) en continu pendant 10 secondes quand le voyant -24°C est allumé. Annuler le Mode Service : Procéder de la même façon que précédemment pour annuler le mode service.
  • Page 20 CHASSIS 371E Mode Service Appuyez 5 secondes sur la touche « réglage » en mode service (repère 1 ) Chaque valeur de consigne de température -16°C à -24°C s’allume pour contrôler les composants de l’appareil Numéro -16 : s’allume : test du compresseur Numéro -18 s’allume : l’élément chauffant pour le dégivrage fonctionne...
  • Page 21 CHASSIS 371E Codes Erreurs SONDE TEMPERATURE MODE UTILISATEUR MODE SERVICE REACTION REACTION Le voyant -16°C clignote >+50°C ou <-50°C (1)Congélateur (sonde en c/c ou coupé) (2) Réfrigérateur C/c (< 100) ou <-50°C (3) Dégivrage Le voyant -18°C clignote (4) Sonde d’ambiance AT...
  • Page 22 CHASSIS 371E Codes Erreurs Affichage d’un défaut de refroidissement Remarque: Pour éviter les fausses alarmes, la fonction d’alarme est désactivé aux conditions suivantes: • Pendant les 6 premières heures après la première connexion du produit. • Pendant la période de dégivrage •...
  • Page 23 Mode Super congélation Pendant le mode Super congélation : Si vous appuyez sur le bouton de réglage de température, le mode est annulé et le réglage restauré à -16°C. Remarque : Le mode « Super congélation » est annulé automatiquement au bout de 24 heures ou lorsque la température du capteur de congélation est inférieure à...
  • Page 24 INFORMATION TECHNIQUE ARMOIRE CONGELATEUR 371E Mode Démo / Mode Magasin Mode Démo Ce mode est utilisé uniquement pour les points de vente pour des démonstrations aux clients sans faire fonctionner le compresseur, ventilateur...etc., sauf l’éclairage et l’affichage digital. Validation du Mode Démo Lors du branchement de l’appareil sur le réseau électrique, vous avez 1 minute...