Brightness Adjustment; Mounting On A Tripod; Technical Data - Bresser STR-48B Instruction Manual

Bi-color led ring light
Table of Contents

Advertisement

Available languages

Available languages

Important: Disconnect the device from the power supply if it
is not going to be used for a long period of time!

BRIGHTNESS ADJUSTMENT

1. Turn the dimmer knob (
brightness.
2. Turn the dimmer knob (
the brightness.
COLOR TEMPERATURE ADJUSTMENT
2. Briefly turn the color temperature adjuster (
desired light temperature. The CCT range is 3200K and
5600K.
ADJUSTING THE TILT ANGLE
1. Hold the ring light and slowly loosen the locking screw for
the tilt joint (
).
2. Move the lamp head to the desired position and tighten the
locking screw (
) again hand-tight.

MOUNTING ON A TRIPOD

1. Loosen the fixing screw (
that the opening of the tripod connection is exposed.
2. Place the lamp with the opening of the tripod connection
(
) on the spigot adapter * of a tripod * and tighten the
fixing screw firmly.
Note: The ring light can also be held with the handles (
that can be attached with the four screws included.
In this way, the lighting position can be changed quickly
and easily.
ATTACHING ACCESSORIES
The ring light has three so-called
used to attach the camera adapter (
holder (
), for example.
USING THE USB PORT
The USB port (
) on the backside can be used to charge the
Smartphone or Camera while it is attached to the ring light.
DISPOSAL
Dispose of the packaging materials properly, according
to their type, such as paper or cardboard. Contact your
local waste-disposal service or environmental authority
for information on the proper disposal.
Do not dispose of electronic devices in the household
garbage! As per the Directive 2012/19/EU of the European
Parliament on waste electrical and electronic equipment
and its adaptation into German law, used electronic
devices must be collected separately and recycled in an
environmentally friendly manner.

TECHNICAL DATA

Model
Output Power
Lumious Flux
LED Quantity
Color Temperature (CCT)
) clockwise to increase the
) counterclockwise to decrease
) to set the
(optional)
) for the tripod connection so far
(optional)
cold
shoes (
) which can be
) with the Smartphone
STR-48B
48W
4800LM
432 pcs
3200K to 5600K
Color Rendering Index
(CRI)
Dimmer
Light Source
Power Input
Lithium Battery Type*
Size/Weight
"SONY" and the Sony Logo are registered trademarks of Sony Group
Corporation.
)
≥ 85
10 - 100%
0.2W SMD LED
with high brightness
AC100-240V 50/60Hz
NP-F750/960*
(Sony or identical)
Outer diameter 487mm,
Inner diameter 435mm,
Weight 2,1kg
*not included

Advertisement

Table of Contents
loading

This manual is also suitable for:

F004355

Table of Contents