Establishing The Power Supply; Turning On The Led Light - Bresser STR-48B Instruction Manual

➊
➋
➌
➎
DELIVERY CONTENT
LED Light (A), AC power adapter (B), mains power cable (C)
PARTS OVERVIEW
LED LIGHT WITH SMARTPHONE ADAPTER (A)
LED Lightsource
➊
Handle (2x)
➋
Dimmer knob
➌
When turned on, the brightness range is 10-100%
Color temperature adjuster
➍
Tilt joint with locking screw
➎
Fixing screw (tripod connection)
➏
Tripod connection
➐
Vents
➑
Battery holders
➒
Power switch
➓
3x Cold shoe
⓫
Smartphone holder
⓬
(for Smartphones with a width of approx. 55 – 85 mm)
Camara adapter
⓭
DC connection socket
⓮
USB port
⓯
MAINS ADAPTER WITH CABLES (B)
Mains power adapter with 2-pole connection socket (16a)
⓰
and function light (16b)
Voltage cable (permanently connected to mains power
⓱
adapter) with DC hollow plug (17a)
A
➍
➏
➐
B
⓰
⓰ a
⓲ a
C
⓲
a ⓲
➑
➒
⓫
➓
⓰ b
⓱
a ⓱
b ⓲
Power cable with 2-pole plug (18a) and Euro plug (18b)
⓲

ESTABLISHING THE POWER SUPPLY

1. Insert the DC hollow plug of the power cable (
power connection socket (
2. Insert the Euro plug (
⓲
outlet.
INSTALLING A V-MOUNT BATTERY
FOR POWER SUPPLY
(OPTIONAL)
1. If you require more mobility or don´t have access to a
mains supply, the light can also be operated by separately
available rechargeable batteries (Sony type NP-F750/960)
2. Insert them into the battery holders (

TURNING ON THE LED LIGHT

1. Establish the power supply for the device (insert battery or
connect power cable).
2. Move the power switch (
device on by battery.
3. Move the power switch (
device on by mains adapter.
4. Move the on / off switch (
off the device. The last settings made are retained until the
device is switched on again.
A
⓬
⓭
⓮ ⓯
⓱
) on the ring light.
⓮
b) of the power cable into the power
)
➒
) to the 'I' position to switch the
➓
) to the 'II' position to switch the
➓
) to the '0' position to switch
➎
*not included
) into the