Table of Contents
Advertisement
the basic setting for this, make sure that the microwave
does not resume operation without food inside.
→ "Basic settings", Page 24
Changing the cooking time
You can change the cooking time at any time.
Press the cooking time
1.
Use the setting ring to change the cooking time.
2.
a The change is applied.
11.4 Setting added microwave
Note:
Note the correct way to operate the microwave:
¡ → "Safety", Page 2
¡ → "Preventing material damage", Page 7
¡ → "Microwave output settings", Page 12
¡ → "Cookware and accessories with microwave",
Page 17
Requirement: Observe the information about the re-
spective operating mode.
→ "Setting options with the microwave", Page 18
Press the operating mode that you require in the
1.
menu.
12 Ventilation function "Crisp Finish"
The ventilation function "Crisp Finish"
ture from the cooking compartment so that your food
will be more crispy.
Hot steam that may escape when the appliance door is
opened is reduced.
12.1 Suitable types of heating with the
ventilation function
Only certain types of heating are suitable for the ventil-
ation function.
You can use the ventilation function for the following
types of heating:
¡ 4D hot air
¡ Top/bottom heating
¡ Circulated air grilling
¡ Pizza setting
¡ Intensive heat
13 Meat probe
Cook with precision by inserting the meat probe into
the food and setting a core temperature on the appli-
ance. The meat probe measures the core temperature
.
extracts mois-
Ventilation function "Crisp Finish" en
Select the settings for the operating mode, e.g. type
2.
of heating and temperature.
Press
"Added microwave".
3.
Use the setting ring to set the microwave output.
4.
5.
Press
"Cooking time" and set the cooking time.
Press
to start the operation.
6.
a The appliance starts to heat and the time counts
down.
a When the time has elapsed, a signal sounds. A
message appears on the display confirming that the
operation has finished.
Once the cooking time has elapsed:
7.
If required, you can select other settings and re-
‒
start the operation.
When the food is ready, use
‒
pliance off.
Changing added microwave
You can change or deactivate the added microwave at
any time.
Press the microwave output
1.
Change or deactivate added microwave with the
2.
setting ring.
a The change is applied.
12.2 Setting the ventilation function
You can activate the ventilation function at any time,
even after the start of the operation.
Set a suitable type of heating and a temperature.
1.
If required, you can select other settings and com-
bine with the ventilation function.
Press
"Crisp Finish".
2.
Press "On" in the setting ring.
3.
Press
to start the operation.
4.
a The appliance starts heating.
a The setting values are shown on the display.
When the food is ready, use
5.
ance off.
Note: Amplified fan noises can be heard while the ap-
pliance is in operation.
Cancelling the ventilation function
You can switch off the ventilation function at any time.
Press
"Crisp Finish".
1.
Press "Off" in the setting ring.
2.
a The operation continues without the ventilation func-
tion.
to switch the ap-
.
to switch the appli-
19
Advertisement
Table of Contents
