Table of Contents
Advertisement
S6004
: PAUSE switch
S6005
: PLAY switch
S6011
: POWER switch
S6012
: SELECTOR switch
S6013
: RDS switch
S6014
: H_BASS switch
VR6000
: VOLUME Jog
- The voltage value and waveforms are the reference voltage of this
unit measured by DC electronic voltmeter (high impedance) and
oscilloscope on the basis of chassis. Accordingly, there may arise
some error in voltage values and waveforms depending upon the
internal impedance of the tester or the measuring unit.
- Importance safety notice :
Components identified by
important for safety. Furthermore, special parts which have
purposes of fire-retardant (resistors), high-quality sound
(capacitors), low-noise (resistors), etc. are used. When replacing
any of components, be sure to use only manufacturer's specified
parts shown in the parts list.
Caution !
IC, LSI and VLSI are sensitive to static electricity.
Secondary trouble can be prevented by taking care during repair.
- Cover the parts boxes made of plastics with aluminium foil.
- Put a conductive mat on the work table.
- Ground the soldering iron.
- Do not touch the pins of IC, LSI or VLSI with fingers directly.
21.1. Optical Pickup Unit Circuit
mark have special characteristics
62
Advertisement
Table of Contents
