Table of Contents
Advertisement
Contact Closure Sensor Configuration
The contact closures can be used to alert the network management system of problems
associated with the remote location. The contact closure sensor can also detect the
opening and closing of a switch, such as a equipment door being opened or closed.
The figure below illustrates this application.
Chassis Configured for Open Door Alarm
Page 15
Specifications
iConverter
Description
1-Module Redundant Power Chassis
Standard
IEEE 802.3, 802.3af
Compliances
Regulatory
UL, CE, FCC Class A, UKCA,
Compliances
AS/NZS 3548 and VCC1 Class A
Environmental
RoHS, WEEE and REACH
Management*
Telnet, SNMPv1, SNMPv2c, SNMPv3, Serial Console
Frame Size
Up to 1,536 bytes
Copper:
Port Types
Sensors:
Copper:
Cable Types
Sensors:
AC Power
AC Adapter:
Requirements
DC Input:
(Terminal Block)
DC Input:
(Terminal Block)
DC Power
Requirements
DC Input:
(AC Adapter)
DC Input:
Output Power
Dimensions
5.4" x 6.8" x 1.0" (137.16 mm x 172.72 mm x 25.4 mm)
(W x L x H)
Chassis:
Weight
w/ AC Adapter:
Commercial:
Temperature
Storage:
Humidity
5% to 95% (non-condensing)
Altitude
-100m to 4,000m (operational)
Chassis:
MTBF
US AC Adapter:
(hours)
w/ Univ AC Adapter: 100,000
Warranty
Lifetime warranty with 24/7/365 free Technical Support
* Management is available when an iConverter module with integrated management (such as the 10/100M2) is installed in the
chassis.
10/100BASE-T (RJ-45)
4 Contact Closures (8-Pin Terminal)
EIA/TIA 568 A/B, Category 5 and
higher
16 to 24 gauge
100 - 240VAC/50 - 60Hz
0.2A @ 120VAC (typical)
9 - 24VDC, 1.5A @ 9VDC (typical)
2-Pin Terminal (non-isolated)
24 - 60VDC, 0.3A @ 48VDC
3-Pin Terminal (isolated)
9 - 24VDC, 1.5A @ 9VDC (typical)
2.5mm Barrel Connector
44 - 57VDC, 0.27A @ 48VDC (typical)
(PoE)
RJ-45 (Alternative A & B)
3A @ 3.3VDC (per power input)
1.5 lbs. (0.68 kg)
2.0 lbs. (0.91 kg)
0 to 50°C
Wide:
-40 to 60°C
-40 to 80°C
540,000
250,000
Page 16
Advertisement
Table of Contents
