Table of Contents
Advertisement
WEEE directive: (a) Do not dispose waste equipment with unsorted municipal and
household waste. (b) Collect equipment waste separately. (c) Return equipment using
collection method agreed with Omnitron.
The equipment is marked with the WEEE symbol shown to indicate that it must
be collected separately from other types of waste. In case of small items the symbol
may be printed only on the packaging or in the user manual. If you have questions
regarding the correct disposal of equipment go to www.omniton-systems.com/support
or e-mail to Omnitron at intlinfo@omnitron-systems.com.
Safety Warnings and Cautions
ATTENTION: Observe precautions for handling electrostatic discharge sensitive
devices.
WARNING: Potential damage to equipment and personal injury.
WARNING: Risk of electrical shock.
Customer Support Information
Phone:
(949) 250-6510
Fax:
(949) 250-6514
Address:
Omnitron Systems Technology, Inc.
38 Tesla
Irvine, CA 92618, USA
Email:
support@omnitron-systems.com
URL:
www.omnitron-systems.com
040-08245-001E 10/22
Page 3
iConverter
1-Module Redundant Power Chassis
®
User Manual
Product Overview
The iConverter 1-Module chassis features a number of redundant power inputs, RJ-45
port and alarm options. It supports primary and secondary power input options and
variety of power connection types. By utilizing the optional RJ-45 ports, the chassis
can be powered from a connected Power Sourcing Equipment (PSE). Optional contact
closure sensors are provided for connection to external alarm indicators. By installing
a managed iConverter module into the chassis, the chassis functions can be remotely
managed by Telnet and SNMP software such as Omnitron's NetOutlook
software.
This User Manual describes the following models:
Two
Model
Contact
RJ-45
DC Input
Number
Closure
Ports
Barrel
8245-11pt
X
8246-11pt
X
X
8246-51pt
X
8247-11pt
X
X
8247-12pt
X
X
8247-220t
X
8247-31pt
X
8247-320t
X
8248-11pt
X
X
X
8248-12pt
X
X
X
8248-220t
X
X
8248-31pt
X
X
8248-320t
X
X
8248-51pt
X
X
8248-520t
X
X
Use the
Power Calculator
to verify the iConverter chassis power supplies will meet the
requirements of the installation.
Backplane Architecture
The chassis features two Ethernet backplane buses (A and B) that operate at
10/100Mbps. Both buses are enabled by default. When an iConverter module that
supports Ethernet backplane connectivity is installed in the chassis, the A bus connects
directly to the RJ-45 Port A, and the B bus connects directly to the RJ-45 Port B. .
®
Management
Primary Power Input
Backup Power Input
DC Input
DC Input
PoE
DC Input
2-Pin
3-Pin
Power
Barrel
Terminal
Terminal
RJ-45
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
Page 4
DC Input
2-Pin
Terminal
X
X
X
X
X
X
X
Advertisement
Table of Contents
