Advertisement
Caution-conditions that may damage the instrument.
NAG/IM/MTC1200/01/22
Do not use this instrument for any
application other than the calibration work.
Any other use of the instrument may cause
unknown
hazards
Completely unattended operation is not
recommended
Do not use the instrument if the Cooling fan
located at the bottom of the Instrument is
out of order
Always operate this instrument at room
temperature at 23 ± 2˚C. Allow sufficient air
circulation for the instrument by leaving at
least 6 inches (15cm) of clearance around the
instrument
Do
not
turn
temperatures higher than 100˚C. This would
create a hazardous situation. Select a set-
point less than 100˚C (preferably close to the
ambient
temperature)
Instrument to cool before it turning OFF.
Component life time can be shortened by
continuous high temperature operation. Use
of this instrument at HIGH TEMPERATURES
for extended periods of time requires
caution.
Not to be used in explosive zones.
to
the
user.
off
the
instrument
and
Also
at
allow
the
20
Advertisement
