Endodontic system with intelligent torque reduction (2 pages)
Summary of Contents for DENTSPLY Tulsa Dental ProSystemGT
Page 1
Complete Endodontic System Directions For Use For the removal of dentin, shaping and obturating of the root canal.
Page 2
Congratulations! 6. Frequently irrigate and lubricate the canal throughout the procedure. 7. Exercise caution in the apical area and around significant The ProSystem GT complete endodontic system you have decided to put curvatures. into practice is truly revolutionary. 8. Files are single use devices. They can become less efficient after An instructional DVD is included in your system purchase.
Page 3
Procedures for Using the Aseptico Endo DTC Motor • Place the instruments, unwrapped, in the autoclave tray. Preset torque settings are recommended for each file series. They are • Use fresh distilled or deionized water. given without guarantee of risk or fracture. To avoid separation, remember •...
Page 4
• In the presence of NaOCl, start crown-down shaping with the 20/10 GT file and progress to smaller tapers, if necessary (crown down), until one of these 20 Series GT files cuts to working length. • Confirm patency by taking a #15 Lexicon K-File 1 mm past the canal terminus.
Page 5
chamber. Press the appropriate start button for the left or right well. The Post Drill Sterilization heating time varies depending on the size of the obturator. • Drills must be cleaned and sterilized before every use. The first beep indicates the obturator has reached the appropriate •...
Page 6
4. Push the holder down (arrow down) until you hear it click. Cleaning Instructions 5. Push the button which corresponds to the size of the GT Obturator Alternate current you wish to heat. Then push the “start left” button. The obturator is now being heated.
Need help?
Do you have a question about the ProSystemGT and is the answer not in the manual?
Questions and answers