Panasonic SA-HT800VP Service Manual page 27

Section Code
F700 MBX overflow
Microcomputer
error
F701 Message command incomplete
F702 Message command changed
F710 AD conversion at AN0 incomplete
F711 AD conversion at AN1 incomplete
F712 AD conversion at AN0 dispersed
F713 AD conversion at AN1 dispersed
F720 DA conversion at AN0 unchangeable
F721 DA conversion at AN1 unchangeable
F880 Unsuitable task number
F890 A message is sent during AV task
F891 Unable to transmit a message to AV task
F893 FROM altered
F894 EEPROM failure
F895 PERR JMP MI SMUCH
F896 PERR JMP NON
F897 PERR NO INIT
F8A0 Unsuitable message command
Meaning
transmission
When replying a message to Disc
Manager. (operation continues)
A message is issued before replying
Disc Manager.
A message is issued before replying
Disc Manager.
Conversion cannot be complete
designated time during check of
conversion before Y/C automatic
adjustment.
Conversion cannot be complete
designated time during check of
conversion before Y/C automatic
adjustment.
Conversion result exceeds standards
while a designated value is set during
check of AD conversion before Y
automatic adjustment.
Conversion result exceeds standards
while a designated value is set during
check of AD conversion before Y
automatic adjustment.
Conversion result exceeds standards
while a designated value is set during
check of AD conversion before Y
automatic adjustment.
Conversion result exceeds standards
while a designated value is set during
check of AD conversion before Y
automatic adjustment.
When a message arrives from not
existing task (error stops)
During transmission of a message
task (error stops)
When a message starts transmission
AV task (error stops)
Firm device incompatible (non-
conformant destination value)
Firm device incompatible (non existing
jumper)
Initialization incomplete
When a message starts transmission
AV task (error stops)
27
Note