Advertisement
Quick Links
Advertisement
Summary of Contents for Knightsbridge SL20CCTW
- Page 1 INSTALLATION & MAINTENANCE MANUAL SL20CCTW / SL20CCTB SL30CCTW / SL30CCTB...
-
Page 2: General Instructions
These instructions should be used to aid the installation of the following products: SL20CCTW / SL20CCTB / SL30CCTW / SL30CCTB SAFETY • This product must be installed in accordance with the latest edition of the IEE Wiring Regulations (BS7671) and current Building Regulations. - Page 3 Using the base plate as a template, mark the location for, and drill the fixing holes ensuring not to • infringe with any gas/water pipes or electrical cables Feed the mains cable through the rubber grommet to retain IP rating, and secure the base plate to the •...
- Page 4 Replace the body of the luminaire to the base plate and fix it with the screw and washer • Switch on and check for correct operation • SENSOR SETTINGS SENSOR SETTINGS This controls the range of the sensor from a minimum of 1m to a •...
-
Page 5: Warranty
GENERAL This product contains a light source of energy efficiency class E to Regulation (EU) No. 2019/2015. This product contains non-replaceable light sources and non-replaceable control gear. Clean the external surfaces with a damp cloth using a mild solution of detergent and warm water only, do not use aggressive cleaning products or solvents that may damage the product. - Page 6 Supplied By: (UK) Manufacturer ML Accessories Ltd, Unit E Chiltern Park, Boscombe Road, Dunstable LU5 4LT, www.mlaccessories.co.uk (EU) Authorised Representative nnuks Holding GmbH, Niederkasseler Lohweg 18, 40547 Düsseldorf, Germany Email: eprel@nnuks.com -20°C~ +40°C ML Accessories Limited LU5 4LT www.mlaccessories.co.uk AVSEP21_V1...