Notification Panel And Status Bar; Descriptions In This Document; Basic Phone Operations - Doro 4100H Manual

Notification panel and status bar

At the top of the main screen you can see if there are any notifications.
Press OK to open the main menu and the relevant application that have a
notification.
IMPORTANT!
When a new system software is available, a notification message is
displayed. Select to start downloading. The download time may vary
depending on Internet connection. We recommend that you always
update your device to the latest software version to get optimal
performance and the latest enhancements. During an update your phone
will be temporarily out of service, even for emergency calls. All contacts,
settings, etc. will remain safely stored in the phone. Do not interrupt the
update process. See Software update, p.28 for more information. You
need to have a working data connection to be able to perform the
update with the firmware over-the-air (FOTA) service. See Mobile data,
p.25 on how to activate a data connection.
Also at the top of the main screen you can see the status symbols, such as
network signal strength, battery level, Bluetooth activity and more.

Descriptions in this document

Descriptions in this document are based on your phone's setup at the time
of purchase. Instructions normally start from the start screen. Press
to reach the start screen. Some descriptions are simplified.
The arrow ( ) indicates next action in step-by-step instructions.

Basic phone operations

Call :
Dial a number or answer incoming call.
•
Enter the call log.
•
End call/Power on and off
• End calls or return to the start screen.
Long press to power on or off.
•
English
:
4