Table of Contents
Advertisement
IMPORTANT SAFETY INSTRUCTIONS
PLEASE READ CAREFULLY BEFORE USE • FOR HOUSEHOLD USE ONLY
WARNING
To reduce the risk of injury, fire, electrical shock or property damage,
basic safety precautions must always be followed, including the following
numbered warnings and subsequent instructions . Do not use appliance for
other than intended use .
26 DO NOT fill containers past the MAX
FILL or MAX LIQUID lines.
27 DO NOT operate the appliance with an
empty container.
28 DO NOT microwave any containers
or accessories provided with the
appliance.
29 NEVER leave the appliance unattended
while in use.
30 DO NOT blend hot liquids. Doing so
may result in pressure buildup and
steam exposure that can pose a risk of
the user being burned.
31 DO NOT process dry ingredients with
the Single-Serve Blending Cup and
Pro Extractor Blades® Assembly, or the
pitcher and Stacked Blade Assembly.
32 DO NOT perform grinding operations
with the Single-Serve Blending Cup
and Pro Extractor Blades Assembly,
or the pitcher and Stacked Blade
Assembly.
33 NEVER operate the appliance without
lids and caps in place. DO NOT attempt
to defeat the interlock mechanism.
Ensure the container and lid are
properly installed before operation.
34 Before operation, ensure all utensils are
removed from containers. Failure to
remove utensils can cause containers
to shatter and potentially result in
personal injury and property damage.
35 Keep hands and utensils out of
containers while chopping to reduce
the risk of severe personal injury or
damage to the blender/food chopper.
A scraper may be used ONLY when the
blender or processor is not running.
6
6
36 If you find unmixed ingredients sticking
to the sides of the cup, stop the
appliance, remove the blade assembly,
and use a scraper to dislodge
ingredients.
37 DO NOT open the pitcher's pour spout
cap while blender is operating.
38 If you find unmixed ingredients sticking
to the sides of the pitcher, stop the
appliance, remove the lid, and use a
spatula to dislodge ingredients. NEVER
insert your hands into the pitcher, as
you may contact one of the blades and
experience a laceration.
39 DO NOT attempt to remove the
container or lid from the motor base
while the blade assembly is still
spinning. Allow the appliance to come
to a complete stop before removing
lids and containers.
40 If the appliance overheats, a thermal
switch will activate and temporarily
disable the motor. To reset, unplug
the appliance and allow it to cool for
approximately 30 minutes before using
again.
41 DO NOT expose the containers and
accessories to extreme temperature
changes. They may experience
damage.
42 Upon completion of processing,
ensure the blade assembly is removed
BEFORE emptying container's
contents. Remove the blade assembly
by carefully grasping the top of the
shaft and lifting it from the container.
Failure to remove the blade assembly
before emptying the container results
in a risk of laceration.
43 If using the pitcher's pour spout, hold
the cover in place on the container
or ensure lid lock is engaged when
pouring to avoid risk of injury.
44 Remove the Pro Extractor Blades®
Assembly from the Single-Serve Cup
upon completion of blending.
DO NOT store ingredients before or
after blending them in the cup with
the blade assembly attached. Some
foods may contain active ingredients
or release gases that will expand if
left in a sealed container, resulting in
excessive pressure buildup that can
pose a risk of injury. For ingredient
storage in the cup, use only Spout Lid
to cover.
45 The maximum wattage rating for this
appliance is based on the configuration
of the Pro Extractor Blades Assembly
and Single-Serve Cup. Other
configurations may draw less power or
current.
46 DO NOT submerge the motor base or
control panel in water or other liquids.
DO NOT spray motor base or control
panel with any liquid.
47 DO NOT attempt to sharpen blades.
48 Turn off the appliance and unplug the
motor base before cleaning.
SAVE THESE INSTRUCTIONS
7
7
ninjakitchen.com
ninjakitchen.com
Advertisement
Table of Contents
