Marco ColdBRU Manual page 11

6
Set volume water
5000
ml
Next -
First water Volume
7
60
%
Next -
8
Set Dispense time
2 00
hr min
Next -
9
Volume : 5000ml
First fill : 60%
Time : 2:00min
Start
10
Volume :
0026ml :
Phase 1
Abort
11
Volume :
3000ml
:
---Draining---
Abort
Press +/- to dial in required volume of water
for this brew and press "Next" when done.
+
Use the +/- buttons to dial in the % of the total water
that will be dispensed in the first pulse.
For medium brews (800g coffee + 5ltrs of water) we
+
would not recommend going over 60% in case of
overflowing. For smaller brews this can be exceeded.
Use the +/- buttons to dial in the dispense time.
Note: This is not the full brew time, brew time may
require additional time at the end to ensure all water
+
has filtered through the coffee.
Review the brew settings.
Pressing "Start" will start water dispense.
Esc
Time
During the dispense phase, the brew can be paused or
0:00:04
aborted.
Pause
Time
After the machine has dispensed the designated
0:03:04
amount of water for the first phase, it will allow drain
time before moving onto the next phase. This cycle will
Pause
continue until all 6 phases are complete.
11