Advertisement
STEP 4 - Remove the three screws holding the Heater
Blank Off Plate and remove the plate. The screws
must be retained for later use. The Blank Off Plate
may be discarded.
STEP 5 - Insert heater assembly into heater compart-
ment.
1.
Move factory wiring out of the way.
2.
Slide heater into heater compartment of air handler.
STEP 6 - Attach heater to coil assembly.
1.
Use three screws removed in Step 4 to attach the heater
to the coil flanges in the locations shown on the heater
at the right.
INSTALLER'S GUIDE
Attach points
Page 5
Advertisement
