Page 4
Connect voltage supply via mains plug, see Fig. [8]. • Flow rate at 0.3 MPa flow pressure The display illuminates and the remaining filter capacity is – Fitting (tap water): approx. 9 l/min displayed in percent. ® – Filter cartridge (GROHE Blue water): approx. 3.5 l/min...
Page 5
III. • Release the button. The control unit of the GROHE Blue ® fitting is set for operation The remaining filter capacity is displayed. with the 600 liter filter cartridge (Prod no.: 40 404 001) at the factory.
Page 6
The plug-in connectors power supply and consult a specialist installer or contact the can then be disconnected, see fold-out page II, Fig. [8]. GROHE Service Hotline via email under TechnicalSupport- Inspect and clean all components and replace if necessary. HQ@grohe.com.
Need help?
Do you have a question about the Blue Pure 31087 and is the answer not in the manual?
Questions and answers