Technical Manual GAMK (& GAM20K) v2.0EN 3. Installation 3.1. Placement of trim The trim of your choice, not supplied with the GAM should clipped around the former as shown in the following illustration: Put a clip, then a second opposite of the first before clipping all ;...
Technical Manual GAMK (& GAM20K) v2.0EN 3.2. Installing In wall through (1.5" threaded) - 1,5" vacuum point BRIO LED GAM (& GAM20K) lights should be installed in a threaded 1.5" duct (vacuum point for example). We recommend that installation is per- formed by a professional.
Once startup and the operation tests are complete, it is recommended to drown the connection with a reusable soft hydrophobic insulating gel. (ref. CCEI PNSP0002) The external flexible cables for these light fittings may not be replaced. If a cable is damaged, the fitting must be destroyed or returned to the manu- facturer for recycling.
Technical Manual GAMK (& GAM20K) v2.0EN 7. Cable Cross-Section CROSS-SEC- The voltage drop in the supply cable of the GAM cable TION (mm²) should be limited in order to comply with the applicable stan- 1.5 2.5 dards and ensure optimal illumination.
Technical Manual GAMK (& GAM20K) v2.0EN B. Declaration of conformity Bleu Electrique SAS (FR47403521693) declares that product GAM (& GAM20K) is compliant with the safety and electromagnetic compatibil- ity requirements of European directives 2006/95/CE and 2004/108/CE. Emmanuel Baret Marseilles, on 27/02/2017 Distributor's stamp Date of sale: .