Technical instructions WPX30 v2.0EN 1. Technical features Sizes ext. Ø 255mm (wall support) Installation Wall mounting Power supply 12 V ~ (AC) 50Hz/60Hz Power consumed 40W maximum (according to colour) Weight 1.2kg (projector+cable)/1.4kg (packaged) 9 powerful monochrome LEDs (3R/3G/3B) LED type + 6 MidPower cool white LEDs 6000°K Risk group 1 (low risk) according to IEC62471:2006 Protection index...
4. Compatibility - Control The BRIO WPX30 LED lights can operate autonomously with simple power cuts applied to the on/ off switch, or be controlled remotely using an RC system (Brio RC, MOD Brio RC or MeteoR with OPT Brio RC), or a RC+ system (Brio RC+, MeteoR2) or by Power Line communication.
Technical instructions WPX30 v2.0EN 5. Use - Autonomous mode In the absence of a control unit, the lights operate autonomously and the user can choose between 18 modes: 11 set colours and 7 programmes; Mode Type Description Set colour Pure white Change of mode Set colour Blue...
Technical instructions WPX30 v2.0EN 7. Installation It is highly recommended to use the services of a professional for the installa- tion. The light is locked in the wall support using a bayonet system. The wall support must be fixed on the wall.
Page 7
Technical instructions WPX30 v2.0EN Wood: After making holes in the panel screw the support plaque G using the 4 supplied screws. Mount the wall conduit B and fix it with the nut E. Glue an O-ring F on the panel before positioning the liner.
Technical instructions WPX30 v2.0EN 8. Electrical Connections Installation of this project involves a hazard of electric shocks. We strongly rec- ommend you contract a professional installer. Incorrect installation places you in danger and may irreversibly damage the product and the equipment con- nected to it.
Technical instructions WPX30 v2.0EN 9. Transformer power The transformer to be used should have a sec- Transformer power Max. no. of X30 ondary voltage of 12V (12.5V according to the model). Its power should be in keeping with the 50VA power of the lights to be connected.
Technical instructions WPX30 v2.0EN 11. Cable section SECTION (mm²) The drop in voltage in the power supply cable of the WPX30 must be limited so that the colours are not al- tered. Max. length 10.0 17.0 25.6 42.6 Respect the table opposite (one projector per cable); www.c- cei.fr...
Technical instructions WPX30 v2.0EN B. Declaration of conformity Bleu Electrique SAS (FR47403521693) declares that the pro- ductWPX30 meets the safety and electromagnetic compatibility re- quirements of European Directives 2006/95/EC and 2004/108/EC. Emmanuel Baret Marseilles, on 28/10/2016 Distributor's stamp Date of sale: ..... . . Batch N°: ......www.c- cei.fr...